Wireless

Is there a way with EAP-TLS configured on a client machine,that you get an alert that the certificate is about to expire.regds

I have 3 vlans set up on my Aironet 1231g (1-native, 516, and 800). The ip address of the AP is on vlan 516; the only reason we have vlan 1 on there as the native vlan is because when I try to remove it or set another vlan as the native vlan, everyth...

Hi, looking for an external 802.11a antenna that would connect off of the "a" module we insert into a Cisco 1220 "g" access point. Are any out there?Thanks.

Hi,I have the version 12.2(13)JA3.Thanks,

I have a system with a BR352 at a central node and a remote BR352 set up in repeater mode 3 miles away. If I have a client station 4 miles away from the repeater, what is the optimum setup for the range parameter in a) the central node BR352, and b) ...

I have a 1410 wireless bridge set up. Due to other issues I am just running this and not associating it with anything. It is juststand alone currently. The problem is 2 hours after I start it it wont respond to pings or anything else. Any ideas?

I need to be able to automatically set or change the network authentication for many users. All clients are running ACU 6.3. Can this be scripted?

The access point is connected router.The access point can ping router.The client associated with the access point cannot ping the router.no traffic filtering is set.I test with another AP, I work well.anyone had this problem ?please help Thank you

Hiya,I have just moved from a Lucent system to the CIsco one and am in the process of setting it up. I have a issue about the secuiryt protocols ?Which is the best ? But more importantly i have started by simply setting up wep in the following manner...

Anyone got an example file how to configure the ap:s to be able to send client walkabout data to WLSE 2.7?I have enabled WDS on my AP:s and set wnm to WLSE ip address but it says not auth.Regards Bjorn Sundin

Hello,I am setting up wireless service for a number of users, now the problem i am having is that the clients are logging on through LEAP. This works fine with the CiscoSecure database (ACS), but i need to have one user database in AD. I have set thi...

Does the 7920 support Cisco's new LEAP?

There is a wireless community that is setup near a client of mine. They have a signal, but it is very weak. What I want to do is put some piece of hardware in that can sit on top of their trailer and then connect to a hub that we can plug ethernet ca...