Wireless

I have a Cisco 350 Wireless bridge (root bridge) with a Breezecom WBC-DS11 bridge (non-root). The two bridges associate, but they won't pass data between them. The only thing that I can see wrong right now is that the Breezecom radio appears as a "cl...

Hi All,I have two IBM laptops. One is a ThinkPad X31 with integrated wireless and the other is a ThinkPad T20 which uses a IBM High Rate Wireless LAN PCMCIA TypeII PC card for wireless connectivity. I have WEP enabled on the router.My home network co...

I found a cisco 350AP 'laying around' at the office, and am trying to configure it to put to use. The problem however is that the username and password are lost. When trying to reset using a serial connection using the :resetall command, the device k...

We have version 11.21 on our AP 350s and want to set up vlan, but cannot find any vlan configuration screans. Do I need to upgrade to a later version?

I'm currently having issues with two users that cannot stay connected. They are the only two using Windows XP I was needing to know if this is a known issue plus what service pack should they should be using for windows and are there any new drivers ...

Any one els have problem with getting ip by dhpc while you haveenable the wep 128 on the apand then enable wep 128 on a client If i disable the wep on the clienti get an ip and when i connect to theap and log on to it, i see thatwep is enable, but , ...

I do have a lifebook (Fujitsu) with the an intergrated Intersil PRISM card. Is this compartible, or how can I get it to work with my Cisco Aironet WLAN? Thanks for the help!!

After several weeks of testing I have recently installed a Cisco Aironet 350 wireless access point and network at one of our sites. The network is working fine however I cannot connect to the access point remotely across the WAN. I cannot access the ...

It seems that I am in a spot of bother with our mass deployment of Wi-Fi.Essentially we have 30 1200 AP’s which are used to connect to Dell and HP PDA’s using LEAP.You might find this peculiar: I have a laptop with a Cisco 350 PCMCIA card which authe...

Hi,When a client requests a certificate from the Microsft CA server, its uses the normal http request.Is there a way for the session to be encrypted(https) when the client is requesting a certificate from the CA server.My concern is, by not encryptin...

We have an active directory domain. We have users with 350 pcmcia cards in their thinkpads connecting to 1200 APs set to allow authentication to an external DB (the AD domain). Everything was happy until a user got married.Her name changes. My day is...

I have a customer who has 4 350 bridges all connecte to a switch, each bridge points to a different site. There is talk of adding to this and bring on another site, which means 6 root bridges all on the same tower going off to different sitesCan anyo...

Is there any list wireless cards which are able to use LEAP????Is always necessary to use ACU when i want to use LEAP????THX

Hi, Does MS-CHAP works in workgroup environment? I did found some documentation in Active Directory.regards, Sam

Hello Everyone,Is there any SNMP Trap available for 802.11 Associations and ReAssociations in Cisco 1100 Series Access Points?In manual I could only find a Trap for Deassociate event. Is this Trap for Association and Reassociation too?Best Regards,Jo...