Wireless

Hi all...Hopefully this should be an easy one- We currently have pretty sporadic usage patterns spread over our APs, but we are looking to expand the wireless use base significantly. I am trying to identify if we would need to expand our AP numbers t...

I understand that the access point has a mini-dhcp server for ease of configuration. My problem is, I need to use a static address on the AP, but still need wireless clients to get leases from my wired network. Does anyone know how I can do this?

In the Cisco Aironet 1200 RADIUS Configuration document, it states that due to a security lapse RADIUS configuration cannot be performed using a network management utility. I assume they are referring to the Web-based management client. Is this true,...

Can somebody explain the necessary VSA attributes for configuring standard PEAP authentication against a Windows 2003 IAS RADIUS server? Is this a requirement to do so? If so, what is the syntax and procedure for doing so?

After setting my debug settings to troubleshoot EAP authentication, I receive the below debugger results. I am running a WinXP / Aironet 1200 / Windows 2003 IAS / Dell TrueMobile 1150 configuration, and all I want to do is get EAP to start working. N...

Hi,I have a AP1100 running 12.2(11) code. This ap is configured as basic as they get, no wep, no filters. I have a Toshiba Satellite Pro 4600 with a built in wireless NIC. The laptop is running W2K pro. the laptop will associate then deassociate with...

I 'm using 2 Aironet AP350 12.03T, PMCIA card, server W2000 with DHCP and ACS 3.2. WHen i configure the access point with the same channel 11, i lose the connection:05:18:14 (Info): Station [PC10040691]xxxxxxxxxxx Authenticated05:18:14 (Info): Statio...

Our customer have IBM laptops(A30P) with onboard wireless cards.( High Rate Wireless MiniPCI Combo card, Actiontec Electronics, Inc ( Manufacturer), PRISM Wireless LAN).I configured static web encryption with 128 bit encryption. Clients loss connecti...

Is it possible to have two different type of antenna connected to 1 AP 1200 series (2.4Ghz, repeater mode).One antenna can be solely used to connect to a root wireless AP outside the building and the other to Client adapters inside the building. Outs...

After upgrading from v8.65 to v8.80 of firmware on BR340 and BR500 devices most protocol filters were automatically removed. We had it set to discard protocols not in the forward list so most traffic stopped. ARP and STP were the only two still in th...

I have a site with 250 users that need to be networked via wireless. What is the limitation of the WAP? Since im running 100mb out, I would probably only try to have 15 or so people connecting to a single AP, but could 25 connect? 50? Whats the limit...

I have a 1200 AP w/ latest IOS trying to do PEAP for wireless clients. When pointing the 1200 to a Funk or ACS radius server it works great. When I point to an IAS server runnng on W2K SP3, I get an IAS error in the event viewer saying "The specified...

Hi,I have one root AP and one AP in reapeter mode. Can I preccess LEAP authentication over air link (repeater AP --> root AP --> RADIUS ?Jarek.