Wireless

I can't get this combo working. Any assistance would be great.ACS 3.1 with certs installed and PEAP / EAP-TLS enabled.XP laptop with 350 PCMCIA card with newest firmware.User database is Active Directory (RADIUS works for IOS and PIX okay)AP1200 with...

I'm using Cisco Aironet PCI cards in Linux, when one mashine is playing the role of AP and the other is a client. The problem is that once assigned the channel remains the same on the client and AP mashine. I'm looking for a solution for this problem...

Hello,Is it possible for the equipment Aironet Bridge 340 (American System) to use the European frequency channels 12 and 13 of 802.11b? This Bridge was installed in Europe, and the channels 12 and 13 are less congested, we'de like to use those chann...

I've got a pair of 350 series bridges (12.0.1T) that are setup in a point-to-point configuration with one bridge acting as root, and the other as non-root without clients. They are configured for LEAP, MIC, TKIP, key rotation, and MAC authentication....

I am having an issue with a Symbol Spectrum 24 High Rate client card connect to the Cisco 1200 AP. The error I receive on the client software is, 'Network out of range'.I was able to configure a Linksys card to communicate with the 1200. Any idea?

Hello, can you plug both radios (2.4ghz and 5ghz) in the 1200 at the same time so that existing clients (up to 11meg) can still communicate with new clients (up to 54meg)? thanks

I have a Access point 350 with version 11.23T. the equipment losesconnectivity between the Access point and the client. the signal never the signal never is lost. ping by utp to the Access stayed point and I do notpresent/display cut.

We are currently working on a solution for a client that would require running VOIP over a Cisco 350 multi bridge. Has anyone had any experience doing this? If so was it succesful and were you satisfied with the results?

Can you configure Bridge to work in a full duplex mode?

will there be a problem for WLSE in a PEAP env, I saw on the web that is support LEAP and Radius, no mention of PEAP

Hi guys,I have a wireless network composed by IAS server on windows 2000 server, I'd wish to authenticate the clients by the IAS server in the leap-tls mode (certificates + login) and the communication must be encrypted in wep, but the authentication...

I have a BR-340 bridge operating in bridge mode. This is one of the original units shipped right after Cisco took over Aironet but has been upgraded with the latest firmware.Works fine for several days and then loses association and has blinking red ...

Hi all,Can anyone tell me whether 802.1x standard is supported by Avaya switches or not?Does 802.1x is only possible with cisco.Regards