Welcome to the Community!
The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally.
New Here? Click here to learn more and get started.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2017550members
1378326discussions

Community Activity

PC won't connect to Switch

I can't ping from any computer to the Switch they are connected to.this is how I made the connections3 servers (Server_Web (IP 173.13.60.11 255.255.255.0), Server_Data (IP 173.13.60.11 255.255.255.0), Server_Email (IP 173.13.60.33 255.255.255))5 swit...

SAB_0-1736920452722.png SAB_1-1736920801690.png SAB_2-1736920831802.png SAB_5-1736920888882.png
SA-B by Community Member
  • 36 Views
  • 1 replies
  • 0 Helpful votes

Missing COP file required on UCCX SU3 ES06 install

This isn't a question....more of a "you need to be aware of this one". Customer has a UCCX 11.6 system they are finally being forced to upgrade to 12.5.  CUCM is currently at 11.5, and will get upgraded in a few days. After upgrading the UCCX cluster...

Capture.JPG

Cisco CP-7821-K9 having calling issue

I have a Cisco CP-7821-K9 IP phone that I recently converted to Third-Party Call Control (3PCC) to use with an alternate service provider. While most functionality is working properly, I'm experiencing a specific issue with outbound calls:Cannot make...

minhaalex43 by Community Member
  • 7 Views
  • 0 replies
  • 0 Helpful votes

Factory Reset HA pair of Cisco ASAs

I've got a pair of hosted Cisco ASA 5525's in an HA pair that are being replaced.  It's a bit of a weird situation because the hosting company owns the devices but they don't manage the devices.  Because they don't manage the devices, they won't perf...

irbk by Level 1
  • 206 Views
  • 8 replies
  • 0 Helpful votes

Cannot ping internal network from PC, but can from router.

Hello!I am trying to get a router set up (cisco 2821). I will include the config below. What i happening is that I want to be able to ping our internal equipment from the PC connected on the network. I can get out to the internet from said PC, but ca...

DavidGIP by Level 1
  • 91 Views
  • 4 replies
  • 0 Helpful votes

Cisco 9200 series not connecting the poe devices

Hello professionals? I'm having a challenge with my Cisco catalyst 9200L 24 port poe+ switch. The poe ports are not connecting my poe cameras. I have other 5 switches of the same model and they are working fine.When I connect my laptop on the ports i...

IMG_20250114_210609.jpg IMG_20250114_210830.jpg

FMC / FTD Estreamer for basic reporting

I'm looking to get some basic reporting from FMC for things like top talkers but can't seem to do it in FMC because a lot of the logs are not going to the event viewer due to its limited size.  What is a simple tool that can be integrated to get repo...

Alex-Pr by Level 1
  • 56 Views
  • 1 replies
  • 0 Helpful votes

Incoming calls comms using wrong SIP

HelloI have two SIP trunks from the same SIP provider. and i am facing issue with incoming calls as they targeting the wrong SIP link .Noted in sip/sdp massage from my VGW to ISP contains the wrong SIP address (c=IN) ,dial-peer and sip bind  configur...

assers001 by Level 1
  • 200 Views
  • 10 replies
  • 0 Helpful votes

ISEやWLCの設定でSSID毎にEAP-TLS認証の調整は可能でしょうか

[環境]ISE(3.2)WLC9800(17.12)CW9164I AP端末A:ISE証明書端末B:ISE証明書端末C:証明書なし[実装したい機能]ISEでCertificate Provisioning Portalsから発行した証明書をクライアントに設定して、EAP-TLS認証を行うにあたり①SSID1は端末Aが接続②SSID2は端末Bが接続③端末Cはいづれにも接続できない③は接続には「既定証明書が必要」のひとつのポリシーセットで動作・①②を構成機器で完結できるような仕組みでどのように区分す...