We have 3 different office locations and an extension 5678 which exists locally at each location. -5678 in HQ_Partition-5678 in BR1_Partition-5678 in BR2_PartitionCSS are defined for each site to direct the calls and is working perfectly fine. When s...
Forum Posts
Hi , We are in the process of deploying CME ver 14.0 , as per cisco CUE (module) is obsolete, also CUE Virtual EOS / EOL lin 2023. Cisco recommends going with Cisco unity connection but our UCS servers are too old, we don't want to reuse it. Lookin...
Resolved! Jabber not showing when on a call status
Hi All,I am unable to get Jabber to show on “Call status”. Our setup is as following: Call Manager 8.5; Cisco Presence server 8.6.4( 2 servers in our cluster) ; Jabber client - 9.1.3.Jabber client is currently provide IM/ Presence, desktop phone inte...
Hello all,I have a problem with a configuration of a ISR 4k. I have a Webex Calling solution, and I configured the router to up a session between the cloud of Webex and the ISR. When I finish with that, and I check in Control Hub, the Trunk still "of...
We have purchased a Webex Room Kit Spark with a Cisco Navigator.The Navigator will not connect to the device. I have upgraded the firmware of the Room kit to ce9.15.3.17 so the Navigator should have followed the room kit device as soon as I connect t...
What is the recommended configuration for CUAC Advanced in an HA configuration, specifically as it relates to CUCM connectivity. My two nodes have only my CUCM publisher node defined in the CUCM connectivity section. Should my primary CUAC node re...
Hi, It's a pleasure. I'm starting in the collaboration world, and I would like to know "How I can block the inbound call to a specific extension". The enviroment is the next "I have 1 cucm, 1 cuc and 1 cube, the cuc is doing auto attendant and voice ...
under this guide :Mobile and Remote Access Through Cisco Expressway Deployment Guide (X12.5) - MRA Infrastructure Requirements [Cisco TelePresence Video Communication Server (VCS)] - Ciscounder :Dual Domain without Split DNS you can see having _cisco...
We have a Cisco MediaSense cluster, which is without service and in the review we validate that the SIP trunk in the CUCM is down, in review with the Cisco TAC it indicates that the MediaSense is not responding to port 5060 or 5061.Cisco Mediasense s...
Hi All,I follow some of the videos and documentations on the Unity notification, I have the HTML and SMTP notification working, however my issue is I somehow turned on the email notification to outlook to send the voice file as well, and I need to tu...
Hello people, I try to find out how many parallel active call sessions can I have with jabber guest. Can you please tell me where to look to figure it out? Cisco Jabber Guest: main_11.1.2.11Exressway c X8.11.4Expressway e X8.11.4 Regards,Eleftheria
hi in the AXL Schema Reference i want to know what ishte deferent betwen the prefex OX,R,X,L,ORbelow is an example OXCallForwardAll RCallForwardAll XCallForwardAll LCallForwardAll ORCallForwardAll
I just installed CUCM and IMP v12.5, and configured Jabber to login internal not through MRA. I entered the IP address of CUCM in Jabber "advanced setting" and try to log in and faced this error "no username specified ". I don't know why, although al...
Hello,Just getting my feet wet, my office mate and I have been tasked to setup the CUCM/ Unity and E911, so we are doing lots of reading and watching videos.I noticed that the default Feature group template did not have mobility or conference enable....
Hello guys, Is there any solution that video operator like on the meeting management but only sees associated space and only manage that meeting. Customer requested for that security reasons. Regards,Baris.
