Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
At one of my customers, I am implementing CER for emergency dialing (obviously). I have configured and tested 911 call routing. All call routing for emergency services stays on sight (calls go to the on site security desk) and right now 911 is the ...
We had some disks fail that caused one of our CUCM subscriber servers to be lost. The plan is to reinstall it on another datastore on the same UCS server and join this back to the cluster.My hope is that I can reinstall the subscriber and during the ...
I have recently purchase a Cisco ATA192 VoiP Telephone Adapter/SIP ATA w/ 2-FXS Ports to pair with my BT supplied Business Superhub2 (BT recommends this pairing) No success with pairing, and my PRT LED is Steady RED, if I press the PRT it changes to ...
I'll preempt my question by saying I suspect I already know the answer to this, but am hoping for something easier/cleaner. :) I am attempting to update the Device Description field on several hundred thousand devices on our CUCM clusters (running ...
I have trouble connecting Cisco IP Phone CP 8811 to a network. There is no display on the phone and only the mute light blinks red. Any help is greatly appreciated.
Hi guys, we have trouble with delayed/dropped audio connections from/to Jabber Clients after answering the call.It takes sometimes 1 sec. up to 3-4 seconds to hear the other party.The first audio packets are dropped and after this, the audio stream i...
Important Notes: As such, the COP file should beinstalled via the CLI, not the GUI. We use the Cisco Unified Operating System Administration Web page (GUI). The current update status remains at software upgrade status. Is there a way to stop it or f...
Dear Friends,I would like to know the best design and product (Cisco compatibility) for a hotline phone system. The hotline service should be available 24/7 and without downtime. I need around 150 phones to be installed inside the production factory....
Hello , Following Bug CSCwd64245 I Try to Install in CUCM patch : ciscocm.v1_java_deserial-CSCwd64245.cop.sha512 But I got error :"The selected file is not valid.please ensure that cop\ISO isintended for this release " My version is 12.5.1.12900 any...
Hello,I have CME12 installed on ISR4321, when I tried to register Cisco SIP 7841 it said unporoviend, when I searched I couldn't find my sip phone model in CME12, please check the belowRouter(config)#telephony-serviceRouter(config-telephony)#loadRout...
Hello,does anyone use the mentioned application? We're using CUCM 14 and trying to install the Assistant Console for few users. The installation works fine, but the AssistantConsole.exe wants administrative privileges?I just found this and it's not m...
Hello, I have an issue about ringing back tone when I call from outside --> PSTN (SIP trunk) --> CUBE --> UCCX --> redirect call to extension. I hear IVR and can do DTMF. then press extension, no ringing back tone.However when I call from PSTN (SIP t...
voice translation-rule 1rule 1 /^8251/ /406999/!voice translation-rule 90rule 1 /.*/ /406900/Voice translation-profile SIP-OUTtranslate calling 1Voice translation-profile OUTFAXtranslate calling 90____________________________________________dial-peer...
Every time I press the pound key then any number after it the phone says invalid number without me putting in the full ext. #968 is my page code. / Overhead paging code. Is it the dial plan?
Hello!We are currently using a voice translation rule to reject calls from specific numbers at the CUBE level (see attached screenshot), but we have reached the maximum (100) and I haven't been able to stack multiple voice translation rules on the in...
| User | Count |
|---|---|
| 8 | |
| 8 | |
| 2 | |
| 1 | |
| 1 |
