IP Telephony and Phones

Hi,I faced one different issue, i restarted the CUCM 5.1.3, after that i am not able to reach the server. But i m able to reach all other servers in the same cucm cluster. From the particular server I am able to reach the all out side network. But fr...

Hi Gents,I've testing a VG248 operating in fallback mode but can't seem to transfer a call from the analog devices attached. Each time I press the 'Recall' button to initiate it I get a re-order tone.The analog phones can call other devices fine and ...

We order for NME-CUE, it comes with CME lic, we are going to use the CUE for CUCM, we need to change the CME lic to CUCM LIC.COuld please some one light how to change the default lic to CUCM lic and I am having laptop of windows XP, can I enable FTP ...

Hi,We are using reception phone 7962 with the 2 added 7915 module phone. The issue is 7915 module is not working. We have upgraded the firmware 8.5.3 for 7962 and the firmware for 7915 1.0.4 but still no luck. Anybody has any idea how to resolve this...

Here is the scenario.Call enters to a 2821 voice GW like this:PSTN-->E1 PRI-->2821GW. Output of the 'debug voice ccapi inout' command shows that «Screening=User, Passed":*Sep 24 08:45:44.943: //879/7B9E71F1807B/CCAPI/cc_api_display_ie_subfields: c...

I have cucm 7.0Have configured a hunt group with 3 extensions.Have set the pilot for DDI.When I call in from PSTN. It only calls two extns. never the third. Does this all the time.If you call the pilot internally, it works fine.I can only assume ther...

Hello,How to configure the Script Editor in Cisco UCCX 7.0?Plz any one hve this materil share it with us.Thanks a lot.

Hi,I have CUCM cluster (1 publisher and 1 subscriber) and I have to configure SIP trunk to telephone provider.They need my IP address for SIP trunk. Subscriber is the one that is doing call processing (CUCM 6.1.2).Do I give them IP address of Subscri...

do CAD have any feature to seach list of users in the company like attendant console. cause when agent recieve call and need transfer it was hardly to click phone book buttom, in the attendant console application,they can list local directory from CM...

Hi,This is the scenario. We have a CUCM 7.0 cluster at HQ with remote site phones/gateways. There are about 8 Telco circuits (both T1 PRI and CAS) AT HQ. Each remote site is setup for SRST and has its own gateway with either a T1 CAS or PRI. Local...

One of our programmers wants to send a short pre-recorded message to our client phone.It is for .NET frameworks. Have anyone done that before???I mean I don't really care to use our CUCM system or 3 party vendor hosting service, we would like send t...

Is there a way through RTMT that you can proactively monitor the health of an intercluster trunk and set up alerts if the trunk is not available or unable to process calls?

Hi,Can I change 7975 display picture if I use CME?Thanks!Best Regards,Teru Lei