Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello all,I have a line group, all the members are in the group are using extension mobility. My question is, is it possible to forward all the calls coming to this group to a common voicemil box when all the members are not logged in. And also i hav...
hi,it is possible to install cisco unity 5.0 without Exchange ?i don't need the notification, i need just configuring voice mail and Autoattendant ?thanks
Hi..I have configured IPMA with proxy mode. I just configured CFNA on assistant proxy line to Manager's primary extension, so that if Assistant doesnt answer the call, it can be redirected to manager after few ringout.Thanks
Hi, I have been struggling for hours on this one. I have new installation with a mgcp gateway with an E1. My E1 is up my gateway is registered. But i can not call out, i dial from a phone and get reorder tone after a second or two. I have debugs on g...
The problem i have with the 7940 phone is that they keep showing the message Configuring IP randomly. To overcome this i usually unplug the phone from the network and then plug it back in and after that it works fine without any issue but this is not...
Hi ALL,Please suggest how to disable SIP ALG in IOS 12.4 onward.Thank you.
HiWe have a dozen sites with H323/SRST, on the last weekend we have a window maintenance on CCM Cluster(5.1.3). So, all the site works on srst no problem. But when the cluster CCM back works, few phones register no CCM, 90% of phones stay on srst. Ti...
Guys,I have a requirement of defining a pilot point and insert two operator extensions in it so that if one operator is busy the call can be forwarded to the other operator.can some one tell me how to the mentioned task.
HiI know that is possible change the passwordd of user of OS admin.But is possible also change de username?ThxPeterson
I have CME 2.0 configured with an auto attendant but my ip phones rings only twice and considers them as not available how to set RNA on my ip phones to a larger number.
We have several receptionist in our building that use the Attendant Console to answer the main line. Today one of our receptionist lost her speed dials that she spent several days on. She logged in like she always does and they're all gone! "Jim J...
hi alli wish know how configure SIP trunk with Siemens hipath 4000, some example configuration or way.THX
Hello,Currently I have interconnected a GW AS5300 with an Ericsson ANS using ISDN. The GW receives calls in SIP via Internet and pass them to the ANS using ISDN.My question: does the GW reserves an ISDN channel even if the calls ends up being:Cause i...
Hi,We have been using the embedded database for end users since 4.1 and now willing to switch to LDAP sync and auth. Before we enable the sync though, we know that userIDs in the embedded db need to match the ones in the LDAP directory. So, right now...
I'm working on a 3825. I have 2 7960 phones in fallback mode. The main ext is 52720. When I make a call from one phone on ext 52723 to 52720 I pickup. Then when I call on a second line 42723 to 52720 it doesn't rollover to 1st rollover which is 427...
