IP Telephony and Phones

Hi, I have a 7970G and I can?t seem to get it to connect to my VOIP Via Talk. The registration credentials are all perfect. I'm also running SIP70.8-0-2SR1S which does not have the random high udp port request security feature that the newer versions...

Hello, I appreciate the help in the below issues:1- The 7970 is only displaying 11 digits. However, when the user dials he dials 9 + 1 + 3 digiti area code + 7 digit phone number. This means a total of 12 digits. The phone is displaying up to 11 digi...

The 3rd party conference call disconnects when he tries to join the conference and the remaining 2 people continues..The CCM ver is CCM4.1.3sr3.

Hello,Just like to know what will be the RAID configuration for Cisco MCS 7845-H1 with four (4) hard drives, is two RAID-1 or one RAID-5?Thank you.

Folks, need some heads up as I have exhausted most possible reasons I can find from Cisco.com. Current setup:CCM: CM5.04CUE: AIM module, 2.3.3Task completed so far1. AXL web service activated2. CTI RP for VM & AA added3. 6 CTI ports added4. From CUE,...

have a vg248 1.3.1 ver have restart 3 times still not displaying correct time only 1 of 10. Other displaying correct time for the time zone they are in. any ideas?

hi, There are two branches, branch A and Branch B they are caonnected Via Wireless 10MBps. I need to setup CME on each site, where both of the CME will exist on the same LAN segment

hi:i have the following senario:i have H.Q that consists from the following info:1. extenation number 8xxx2. CM5.x3. PRI link on the 3845 gateway with 1000 DID number with prefix 666two Branch sites:branch 1:1. extention number 7xxx2. gateway 2811 wi...

I read that the SCCP client for Nokia E serie phones is available. I didn't fount this client for download. Does someone where can I downlaod this clientRegardsPascal

Hi everyoneI have seen a couple of instances recently where the CUCME passwords (associated to Devices for TAPI) seem to have defaulted back to "NULL". I cannot see any reason why this has happened, and I'm not 100% sure that this has been the case (...

HiI have configured outlook to dial using Cisco phone. Each time user right click on contact to dial, he has to modify the number as it starts with +44... and then add 9 for external line.Is there way around to overcome this + sign.Cheers,shahid

CCM 4.2(3) --- 2821 MGCP --- Fragmented E1.ISDN status keeps dropping from Multiple Frame Established to TEI-Assigned. There are no errors on the controller or D-channel. When configured for H.323 the line stays solid!!Any thoughts?

I've got a 2800 GW that will be used in a CM4.1 system. The telco lines will be analog and have DIDs incoming. I'm assuming that means I'll need the FXS/DID VIC's for the 2800. Is there any VIC cards that will support outgoing along with incoming ...