we have new LMS 3.1 the snmpwalk option on device center is not working on all devices, say "please wait" but stay like that for 3-4 minutes then go. from the server itself snmp working without a problem.
Hi,I have a problem with User Tracking. The devices connected on my Catalysts 2924XL (IOS 120-5.WC8) are not discover during major acquisitions. At the first major acquisition (just after a system restoration), it was ok, but during the next acquisit...
2811 is supporting the attached mibs , but i m getting the error as belowThe node is supposed to give response for "bridge MIB table". when we checked the o/p of 'snmpwalk <node> 1.3.6.1.2.1.17' we are getting " dot1dBridge.dot1dBase.dot1dBaseNumPor...
Hello dears all, I have got a CSS 11503 where any commands can be passed as no answer is showed when it arrive.Our experiences tell us that the PCMIA flash has been already broken .How can we see if there is a DISK physically installed ?It seems that...
Hi Experts,WLC (4400 series) is not recognized in Campus Manager 5.1.3 Topology Map despite the device state under CM is Managed.Please advise!! Thanks!
I have these two issues regarding discovery1. Several devices (cisco 6509) are being discovered via multiple interfaces, loopack, Ethernet0, serial 0/0 etc2. Device has two loopback interfaces and both are being discovered, how do I say to manage onl...
Hi,Is there anyway to disable config archivings for a certain line in theconfiguration. What happens is cisco works looks for config changes and then creates an archive for this. Everytime it checks the ntp clock-period is a different value so than...
Hi All,We are in the process of upgrading from LMS 2.5 (yeah, I know) to 2.6. Is there a standard migration path I should follow? The document I got from the Cisco website does not suggest anything in terms of backup and, more importantly, restore in...
Hi all,I was wondering if anyone knows if DFM 3.2 and RME 4.3.1 are supported in LMS 3.1? The documentation for these applications shows (with LMS 3.2) in the title, so it leads me to think that I need to upgrade to LMS 3.2 in order to obtain suppo...
We are in a buying process of catalyst 4500 to replace the 6006 (endofsupport). We are a broadcast tv station with 400 users unified in the same building accross 4 flors with 35xx switchs linked with fiber (GBIC), step by step we are introducing vide...
Hi,If I set the interfaces to "false" for management in DFM are administratively down. When I bring those interfaces up will I have to manually go into DFM and change them back to "true", or on a DFMdiscovery will it see the change and automatically...
Recently added a 2811 router to our network, and I was informed about this advisory "Advisory ID: cisco-sa-20090908-tcp24".We are running Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4(22)T, RELEASE SOFTWARE (fc1)I'm not ...
Hi,Is there a way that the bulk/group of devices can be completely unmanaged from DFM (LMS 3.1)for a temporary basis and they can be set to managed state whenever required.What would be the easiest way to do that via GUI?-Thanks
