Network Management

Hello Everyone,I've installed LMS 3.0 yesterday with evaluation (90 day's). After this I would like install the Licensfile via the Link (CS-Server-Admin-Licensing), but the Licensingserver is down. I would like to start the Licensingserver over the L...

After a power outage about 20 of my network devices were still reporting faults in DFM. example: if the AAV there is an alert, drill down and there is a power supply event. but in DDV the power supply are OK, telnet to the switch and both PS are OK....

Dear All,I updated device pacakges using web. Error was shown during the update. Here I sent the event log :Number of Packages Selected for Install : 1For Product(s) : Resource Manager EssentialsInstall Invoked by user : adminThe Package(s) Selected ...

Hi,we have a problem with CNA (Cisco Network Assistent 5.3) and Cisco ASA 5520 (OS 7.3). Other devices like Switches were detected correctly by CNA, only the ASA not. HTTPS-Access is available and ASDM works friendly too.Thanks for answers.

We have installed CiscoWorks CommonServices 3.0.5 with Operations Manager 2.0.1 but unable to add Cisco unified Communications Manager 6.0 to Operations Manager database for monitoring purpose. However, we are able to add Voice gateway and Cisco Unit...

Hi,Can we convert Csmgr3.1 enterprise standard 25 device license to CSMGR 3.1 enterprise professional 50 license ?rd edition ,they want to convert to professional 50 lic edition .Thanks in advance -- Dinesh One of my customer having standa

We're checking compliance on all FA ports for switches using standard config settings:+switchport mode access+switchport access vlan xxx+switchport port-securityetc.However, sometimes an AP hangs off a FA port or even a switch and want to build some ...

Does anyone know if there is any "hidden" way that I could use to shutdown multiple ports on multiple switches.. criteria below:1) Multiple switches (multiple models) 2) switchports in no particular order are down(eg. some switches ports 3,4,5, 9, 2...

Hi folks!Anybody knows how can get information about the LMS version by command line or by a log file?I cannot open the LMS web home page.Thanks a lot!Leonardo

Hi Netpro,Im running with CW RME 4.0.3 in our environment. I want CiscoWorks to generate email notifications and send it to my email account right away once it receive any severity 4 (any warning syslog msg)coming from switches/routers. I notice that...

Does anyone know, when looking up this command it says it defaults to the US standard. Is that the old standard or new standard? I ask because when I issue the following command in 12.4, it accepts teh cmd, but doesn't change the running config.clock...