Network Management

Hi,I?m trying that RME supports the switches Cisco 2960. I have downloaded the package and I always get the following message:"WARNING : Cat2960(2.0):Consistency check failed for base package SharedSwim2900XL".I have RMW 4.0.4 with Windows 2003 Stan...

Hi,I?m trying to upgrade Common Services to the versi?n 3.0.4, but the installation always stops at 10%. Have I to do anything special?. I have stopped the CiscoWorks Services before the upgrade, I have closed all the application,...But nothing. Only...

Hello, I?m using the good old excel sheet to manage IP address ranges and allocate IP addresses.Does anybody knows about an application to do this in a better way? Thanks a lot for your help. Laurent

We have a machine installed with LMS2.5.1 with dual NIC cards. We have made necessary changes to the gatekeeper.cfg. All have been working fine and we are able to receive Syslog. However, we need to change the one of the NIC card ip address. We have ...

I am using RME 4.0.3. I tried to change the device credentials from the RME > Device Management > Device Credential Verification. It only allow me to change the credentials for one device at a time. The RM3.4 allow me to change the credentials of mor...

Hi,I've been trying to update the software on our NAM (WS-SVC-NAM-1)from v3.4 to v3.5. This NAM is running in a 6509. Below is what I get during the ftp process:<upgrade ftp://192.168.11.130/c6svc-nam.3-5-1.bin.gz --installDownloading the image. This...

Any way to update credentials en masse, perhaps via CLI or perhaps by inputing a default set of values. 100 to go and the web is killing me!! Help Please!This is one of my huge pet peeves on CW.we are running on Unix. CW Common Services 3.0.4Cisco...

Does anyone have more information on what the cluster Configuration of CNS AR 4.0 offers (i.e. does it keep states of active session managers) and how to set it up?Regards.

Hi All, One of our NAS server, is using a default string for User-Password attribute value in the event that no password is set by the user in PAP authentication mode. How can we ignore that value or set it to Null under CAR in order to use the Allow...

I uploading config from switch (6509) to tftp server. Source: <http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa3.shtml>But config include DEFAULT and NON-DEFAULT configuration.How copy only NON-DEFAULT configuration?

I don't understand the way the config fetching works in RME. I choose the Sync Archive and mark the Fetch Startup Config checkbox. The configs are successfulle fecthed but later, when I browse the configs version tree I see several versions of Runnin...

Hi,I have around 2000 cisco devices in my network and I want to run a End Of life report for all of them, So we can upgrade those with new model. I have ciscoworks in my network, can it help to find such report or something else which can be done her...