Hi, Every time our PI runs through a Discovery jobb, every device sends a %SYS-5-CONFIG_I syslog. What has PI done in config mode on the device and can this behaviour be changed?In our case, our tool for configuration management triggers on this sysl...
I am using one cisco asa 5510 and one juniper srx 240 firewalls,how to configure high availability between those two devices.
Hello, can some please help me with the command or possible guide line on, How to find out, what changes were made to the existing router configurations during the last configuration change on a Cisco ISR 897? I know, who made the changes and when,...
Hi support We are trying to use eem script and have issue with sending through our mail server We are using a external mail server which uses a user name and password we need information on the syntax of passing username and password to the ex...
Resolved! EEM stops at cli "telnet"
Periodically run script to check if channel is down, and restart LTE modem. But script suddenly stopped workin on issuing telnet command event manager applet LteReboot event timer watchdog time 600 maxrun 550 action 000 comment "event timer watchdog...
Hi, My goal is to create custom triggers to move our Skype phones into our phone vlans, polycoms into their proper vlan, and everything else into the data vlans on our access switches. I've been able to create custom triggers that identify our sky...
Is it possible to send a config via snmp using Prime if you can not get to exec prompt on cli?
I want to remediate the following vulnerabilities from the Cisco Switches and ACS which are came after scan using Nessus. Your valuable response really helps me.** Note: The Solutions are suggested by the Nessus during Scan the device. If you want th...
Hi, I am fairly new to eem scripting. Can anyone help with writing eem script for copying license file from tftp to ISR 4k flash and then install the same (possibly for multiple routers)?
Hello, When I’m trying to connect my switch in https on cisco manager, this doesn’t work. Switch cisco catalyst 2960-s IOS 15.2 If you need, I can send my configuration. Can you help me ?
I am not able to integrate my Cisco Prime Infrastructure with my APIC-EM, Cisco Prime is version 3.1.0 and APIC-EM is version 1.3.2.37 On Prime I navigate to Administration / APIC-EM controller, add the APIC-EM server IP and enter credentials I know ...
Buenos dias, Tengo un stack de X unidades de SG500 28 Port Gigabit PoE Stackable y varias Vlan funcionando en el mismo, en varios port la Vlan "A" administrativa (Untagged) es la misma en la que se encuentra la IP (rango de "A") del Stack, pero a su ...
