Other Collaboration Subjects

Can I add a subscriber by "Importing an existing Exchange User" that is in a different doamin than the Unity Server? If not is there a different way to do this. When I look for the Existing Exchange User I can only see users in the domain the Unity...

With no active call on the gateway, Call Manager is sending rtp traffic from port 16600 to port 16600 on the Gateway.Gateway, in response, is sending ICMP port unreachable to the CallManager.

I have a 7815-2000 which keep on generating the following error in the event log.Fan sensor 0 fell below threshold of 0 RPM. The current value is 0 RPM. Anyone seen this error before or know how to turn it off. The source of the error is from Dire...

Hi,I've been looking into an issue with a Unity Server which has one way audio. During the install it asked me to select a switch (Cisco CallManager) and in the switch settings after the install it displays that its using CallManager... as it should....

We are running CCM 3.1 and I need to see if there is a way to block certain inbound DID extensions, giving a busy signal would work or routing the call to Unity would also work. But I need all other functions of the extension to work, i.e transfer, o...

I have a site that has 30 or more 7912g telephones and intermittently while users are on a call internal or PSTN their conversation is interupted by a rumbling noise. The call does not disconnect, but sometimes the noise is so loud that the users can...

Has anyone out there actually seen working Caller ID coming from an NEC 2000IVS2 ? I've got a PBX vendor saying it can't be made to do it (even though it's doing Caller ID on the inbound PSTN PRI right now). I'm doing T1-CAS(E&M) to the PBX right n...

Hello,I use extension mobility with IPphone 7940.I can't log out some users.I try via the services and via the webpage, I receive the message ' logout unsuccessful error 6' on the phone and this message on the webpage 'cannot insert device with inval...

I'm looking for suggestions or documentation links for how to write data set by a variable in a script into an xml file. Another script would then call the xml file to act on that data. The data determines which greeting plays. The customer is using ...

Hello, I just need to confirm a couple of C0S points.I have an IP Phone into a c3550 with a PC off the ip phoneThis example shows how to configure the default port CoS to 4:Switch(config)# interface gigabitethernet0/1Switch(config-if)# mls qos trust ...

If Im doing an upgrade of Unity 4.0(2) Version 4.0(3) Do I really need an Upgrade Kit or can I just download the cds?

Dear all,I would like to use # on my ip phone to indicate to call manager that there are no more digits but it doesn't appear to work and I get number unobtainable. I am running call manager version 3.2(2c)spH. Has anyone else encountered this proble...

I'm trying to find out if a IAD 2400 using FXS ports supports hookflash commands, such as transfer, callpark, conference, etc. Same kind of things that the ATA186 or VG248 support.Cisco docs seem to say yes...our SE doesn't think so...Anybody with a...

I'm not getting caller id info on inbound calls. The IOS on the 2400 is c2420-a2i8sv5-mz.121-5.XR1 with 16 FXS and using MCGP. I don't have any problems with caller id on IP phones, H323, or ATA186, but if I hookup an analog phone to the IAD - not...