Other Collaboration Subjects

I have 2 vg200 with 2 2vic-fxo-m1 cards in each. this is for a test environment. I want 8 different phones to use their own line and their own line only to dial out. i have an h323 gateway set up. For incoming calls, i have the gateway set up to...

How can I send a text message to multiples phones?

Whats is the diference between using DSP and SLIC in VG248 echo cancellation method?

I am trying to achieve the following setup and need help. ext----PBX(A)----|(FXO) Router|--------WAN-------|Router(FXO)|---PBX(B)--extIn this setup i have analog extension on PBX A and i interfaced it with FXO,but on the other side PBXB is ent...

Our AVVID network is growing and more servers are needed. The problem is the new servers are failing to install, with an error about being unable to launch the DCD\setup.exe.The Publisher and existing subscribers are using the A/D plug-in, and memb...

I want to create 2 queues, 1st queue for voice and all other traffic on the 2nd queue or default. Can this be done using multiple ISDN2's, will the 2nd queue or default queue dial when additional bandwidth is required.ThanksRegards D

I am running Call Manager 3.3(2)spC and my 7940G's are running App Load P00303030202, Boot Load PC0303010001. I have a PRI MGCP gateway (in a 3640) connected to the customers Option81. When I make a call from an IP phone to the PSTN via the gateway ...

How can I transfer the original Caller ID in a blind transfer?

Does anyone know if there is a fix to the callwaiting tone not working for 79 series phones. The analog stations recieve the tone when they have an additional call but the 7940's and 60's do not. I cannot load the P003030303 firmware because depres...

Can an Avaya Definity G2 PBX support integration to both Audix Voice messaging and Unity Voice Messaging at the same time?

Its been awhile so could someone please remind me if a reboot of a DC is required after preparing the AD schema for unity.TIA

I have a 3.2.2c Call Manager and a new Unity 4.0(2) voicemail. I have 20 ports registered with Call Manager, however, they register with a 169.x.x.x IP addresses - not the 10.1.18.17 adrress which is actually the Unity.I can dial into Unity and can h...

Hi,We are using CCM 3.3(2) SP-C and CP-7940/60 Phones.Gateway is a 3640 with NM-HDV-E1. Gateway Control Protocol is MGCP.The solution was build to migrate a callcenter.The gateway is connected to a Siemens Hicom (QSIG).So our problem is that the phon...

Is there a dirt utility that can be used for Notes unity? If no, what's backup solution,using Veritas?

Hiwe have a publisher and a subscriber (CCM 3.1.3c), call processing is done on the subscriber. When we downed the subscriber the phones failed over to the publisher. At this point we were able to make internal calls, receive external(incoming) call...