Other Collaboration Subjects

Hello, I know that now the IOS Telephony Service support the ATA186, but I didn't saw anything about the ATA188, does it support it ?Thanks a lot!Regards, Anacelia

I tried modifying the xmldirectory.asp file, but was unsuccessful. But then again, I'm not a an experienced html programmer. Has anyone done this? Is this possible? I just want to change this to something more meaningful to the customer.Thanks.

When trying to upgrade the MCS Backup utility from 3.2.21 to 3.4.31 I get the error message that the version of CM I have is not supported?? The utility is sitting on it's own Win2K box where CM is not loaded. Version of CM I am running in my clust...

I have a customer that requires both UM and VM installs of Unity. They require the ability to forward voicemail between systems. Is it possible to build these in two AD forests with 2 way trust and use Unity networking? Is there a better way?Thanks

I Have a customer that wants to turn off Inbox notification for a few users. How can I achieve this

Have a VG200 running 12.2.11T with MGCP talking to Call Manager 3.2.2c.Problem that I am seeing is that looking at debug isdn q931 I see that we are "sending" a 10digit calling number, but the Telco NOC is saying that they are only seeing the last 7...

With PAT on a PIX version 6.22 (overloading the outside interface) and redirecting RTP upd ports 16384-32767 to an ATA 186 for VOIP - isn't it likely to break applications on other internal devices that are receiving packets with udp ports in that ra...

Is there any way to setup ICD with analog phones connected to PBX.

I have CM version 3.2 (2c) and I work for a bank. I was given an excel spreadsheet of customers names and phone numbers. Is there a way to import that into a directory on the 7940 or 7960 phones so that when a customer on that list calls in his/her...

I'm setting up a call manager network as follows:Call Manager 3.1(3a) on IP address 10.1.3.2Some 7940 and 7960 handsetsA 1760-V (version 12.2(8)YJ) on IP address 10.1.1.5 Slot 0 has an E1 (2 port) Multi-Flex Trunk WAN daughter card Slot 2 has a d...

I need to migrate a UM 2.46 running on-box e55 and NT4 to a UM 3.1(5) box running off-box e55 on Win2K. The customer environment is a NT4 domain. I seem to remember that there was a utility similiar to Dirt for the 2.46 to 3.x migrations. Can some...

We have a need to modify a translation pattern twice a week (to give a different weekend service) - i.e. change a pattern to go to one extension weekdays, and another weekends... I'd like to automate this, and I've found where the patterns are stored...