I have enable everone on my system to be able to set and use the alternate greeting. No one has yet setup their alternate greetings but the Unity system keeps defaulting to the alternate greeting instead of the standard greeting. Is there some where ...
Hi!We have CCM 3.2(2c) with H.323 gateway to PABX (E1 via 2621 router).We can make calls either way OK, but when we clear the call from the IP phone (i.e. the IP phone hangs up first) there is a 7-second delay before the PABX clears the call down.If ...
I have call manager 3.2 and Router 2650. I have 4 FXO ports on Router. I want port 4 to be seprate from the company numbers. I made that phone number from the company different phone scheme. I configured router to forward all call coming on that FXO...
As many of you have surely experienced, I have a cutomer who wishes to use a feature supported by their legacy PBX..."the old system would do this..."Has anyone successfully created a coverage answer group using only CallManager? This means: multip...
ICS documentation ( on CISCO-TAC Priducts and services ) says we can load Call manager application on system SPE of ICS-7750.But when I run the online config-tool, it doesn't allow me to select call manager application on base SPE. Therefore I have t...
i'm using cisco 1751 for connecting two sites through international leased circult. i'm using 4 voice channels for communication between two sites. i'm wondering if there is a command for checking the utilization of the wan link so i can decide if i ...
Hello,I have stranges problems with a 1751 router with VIC with IOS 12.2(11)T. When I try to establish a call between Netmeeting and the router, it completely fail. It's probably because of the H.323 version that is quite more recent on 12.2. However...
I screwed up and installed the win-OS-Upgrade.2000-2-3.exe on my Unity server. I know there is a way to back it out, I saw some doc on it on the Cisco site, but cannot find it now. Anyone know where it is? Tthanks very much! heather
I have upgraded the publisher to 3.13a from 3.12c but the subscriber will not allow for the upgrade to take place. I receive an error "Cannot continue because a valid Callmanager installation could not be detected. Please install the Callmanager sof...
During 3.1.5 setup, (configuration setup) you are asked to choose if your message store is exch 2k or 5.5. Choosing exch2k shows the busy-pointer (hour-glass) for a second or two and then nothing happens anymore. No error indication, no message. Anyb...
When a subscriber tries to edit his private list via Telephone User Interface (TUI), Cisco Unity plays the failsafe conversation ("Sorry. This system is temporarily unable to take your call. Please try again later. Goodbye."). This only happens when ...
We changed IOS version on Cisco 5350 from 12.2(2)xb5 to 12.2(11)T2.Now we see, that value of 'h323-voice-quality' of calls is greater, than earlier (value 37 instead of 10). What does it mean, that quality of service is really worse, than earli...
now, i have one 7835(ipivr2.2+ call manager 3.1), one icm 4.6.1 server. i want make them RUN, anybody give me some step by step guide make me run them correctly???? I never INSTALL such IPCC system ,I need help.thankx allmy address: wujindong@bri...
We seem to have a problem with at least 2 threads from TFTP slowing climbing to 100% usage and staying there (on the publisher) - if we stop the tftp service on the publisher and start it again - it slowly stair steps to 100 %TotalTftpRequestsOverFl...
