User that are can be find directly, are not displaying on Corporate Directory if seache with blank fields!Why it could be?
User that are can be find directly, are not displaying on Corporate Directory if seache with blank fields!Why it could be?
Is their a way to modify the text output that unity generates when caller id is not present so the "Message from an unidentified caller" reads something else.
If you disable identified subscriber messaging system-wide, what will be displayed in the subject line for that voice mail. I'm trying to eliminate the Message from unidentified caller in the subject line of a voice mail.
when i config frame-relay map,large data packet can not go through normallyc2600-js-mz.121-5.T12c3640-js-mz.121-5.T12related config:interface Serial0/0 no ip address no ip directed-broadcast encapsulation frame-relay no ip mroute-cache no fair-queue ...
Does anybody know whether #key works when call between IP phone internally?
Has anyone been able to configure the Definity G3 (or any other pbx with similar functionality) an Cisco gateways to: 1. maintain voicemail mwi and station id etc, and 2. allow the phones full feature functionalityWITHOUT configuring permanent voice ...
Hi,I am running ICM 4.6.1 & am facing the following problem.The TalkOutTimeToHalf in Skill Group Half Hour & Agent Skill Group Half Hour Tables are not getting populated. All the data is 0. But the AgentOutCallsToHalf Column, AgentOutCallsTime & A...
Can I use VoIP through VSAT type satellite network ?
Hello,Does anyone know why I haven't the command option:isdn incoming-voice etc. while I'm in BRI interface mode?I have the following:Cisco 1760VIC 2B-NT/TE (slot 1)VIC 2FXS (slot 0)IOS 12.2(11)T(I do have a ougoing-voice ... -option)Thanx,Rob Wind
Hi all,Has any of you used a VG-248 for a modem bank?. If yes, what's the quality like?. I have had good experiences with its fax capabilities and was wondering if it provides decent modem functionality like the 24 port FXS blade on the Cat 6k.Cisco ...
I am trying to understand the AMIS & Voice Connector part of the upgrade.Page 6 of the Release notes for Upgrade to Unity 3.1(5) have you log onto the exchange server (ours is an off box 5.5) and check the version of file SetupRes.dllDid the initnal ...
Unity 3.1.3 Ex 5.5. Unity has dual intergration with CCM and I3. Half the company is divided on the CCM and all those users have Unity accounts.The I3 users use I3s unified messaging. I am looking for a way to add the I3 members to the dial by nam...
Hi All,I have installed IP ICD (CRA) and it is running fine.The Problem is i have to forward all calls to voice mail, if the agentsare not available!.How can I implement that or is this feature not implemented in the ICD ? RegardsMehmet
I have a remote site that I would like to bring onto my voice network. I recently was down and upgraded the router to a 3620 with dual T1 voice module and replaced the 1900 with a 3524p just in case we decided to go the voice route. I will be unable ...
I have a customer using vg248's for faxes & modems. The vg248's are running 1.1(1). About every month or so, one of the units starts malfunctioning.What happens is faxes won't go through, when you call and listen to the modem screech it fades in and...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-23-2024 11:56 PM | ||
08-21-2024 05:48 AM | ||
07-17-2024 05:55 AM | ||
07-15-2024 12:39 PM | ||
07-09-2024 04:24 AM |