HiI have a cisco 2801 + PVDM16 +VWIC2-1MFT-T1/E1Its running a very recent version of IOS.I can't issue the controller command in configuration mode in order to configure the E1 PRI.Any ideas ?show ver and show diag attachedMany Thanks-P
HiI have a cisco 2801 + PVDM16 +VWIC2-1MFT-T1/E1Its running a very recent version of IOS.I can't issue the controller command in configuration mode in order to configure the E1 PRI.Any ideas ?show ver and show diag attachedMany Thanks-P
hi iam using a boson sim to practice for ccnai am connecting 2 routers point to point, banwitdth set, i can ping, telnet fine between them(195.10.10.2)(195.10.10.3)s0/s1e0 (207.10.10.3) (210.10.10.3)Router rip set networks 195.10.10.0, 210.10.10.0, ...
Hi everyone, I'm newbie here, hope you can help me solve this problem: I have got a CCM5.0.2 and IP Phone 7940. Because SDK 5.0 hasn't been released yet, so i'm trying to use SDK 4.1 to go with CCM5.0.2. I've already install SDK4.1 and 4 components ...
Hi!It might be a simple solution, but i was wondering how to be able to send a new line character within a CiscoIPPhonText xml-file. Currently i'm using '\n'. This does work on a 7940 and 7960... but doesn't on my 7912. Is there an other character wh...
Hello, Please it is urgent. I have a call manager express natted to a real IP. This real IP is used by users from other remote sites (in Dubai), in order to register to the CCME and call our extensions in Beirut. The IP phones (IP communicator) are r...
Im trying to get a background image on a 7970 phone. I created the image, and scaled it correctly 320x212 and the thumbnail is 80x53, both have a color depth of 256 colors. I put the images in the correct directory on our call manager server C:\Prog...
Hi all,We have a large number of IP phones (7961/7960, about a 1000) in our offices. At them minute though the two oldest offices are being upgraded. In these offices when we were deploying the phones we would change the network settings to 100Full. ...
I have snmp write community string configured on all routers and switches. I am looking for a SNMP MIB to configure a command to Cisco routers and switches using SNMPSET option. Can some one point me in right direction for SNMP MIB values to write co...
hello,i have the following scenario, i have right fax server , callManager 5.0 and a voice gateway 3845 with one PRI with DID number 2795XXX, My questions is how i can configure my gateway so that PRI channels can be used for both voice and fax call...
On the open cubes in our firm we would like to put reminders on the phones that Extension Mobility is available for use. To do this I have created an Idle Url screen that reminds users that Extension Mobility is available. I have also added a softk...
Our receptionist console PC based display jumps around the screen when any calls are made to the reception/main number. Functionality seems intact, but the new attention grabbing feature is some annoying and I would like to disable this.
In Cisco Unified CallManager Developer Guide 5.0(2) I can read that the AXL Serviceability URL is still http://ASTSERVERNAME/soap/astsvc.dll and the WSDL is still http://ASTSERVERNAME/soap/risport.wsdl. This seemed to be strange as it is now an Apach...
I'm just wondering if others have used alternate DHCP/TFTP servers in their VoIP deployments. Our Cisco branded is nearing end of life, and rather than spending $$$ on another server, we'd like to simply migrated to our existing highly available cent...
I have about 10 7970?s that have applied a custom background image to. The custom background is white with colored text. Most of the phones display this correctly with the line appearance or assigned speed dial buttons readable with a solid gray bar ...
I am using CCM 4.1.3 and deploying a background image for the 7970 phones.I have the image displayed properly BUT at the botton of the 7970 screen, the last two lines are Select Service and the bottom line is Update and Exit Buttons.I need it to g...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-23-2024 11:56 PM | ||
08-21-2024 05:48 AM | ||
07-17-2024 05:55 AM | ||
07-15-2024 12:39 PM | ||
07-09-2024 04:24 AM |