Hello guys,I have two gateways one for data (WAN) and one for voice (PSTN). Do I need to install and configure the DSP in both gateways or only in voice gateway would be enough?Thanks,
Having a problem getting Attendant Console to update its directory. The info we see in the directory is old information.How can I get this to update like it is supposed to?Thanks
I run CCM 4.1(3)sr2. When I configure different forwarding destinations in the CFNA/CFB fields the call gets forwarded to the internal destination regardless of where the call comes from. I dial from PSTN via cell phone but the call goes to the int...
I’ve run into a little problem and need some help.Right now our current environment is as follows:Nortel PBX, Call Pilot Voice MailCisco Call Manger, Unity Voice Mail.We were going to try to use VPIM to get messages transparently from one voicemail s...
Hello, I have the attached diagram, and want IP phones located at the branch offices (Grupo 1, 2 y 3) to use the remote CUE located at the HQ (Central) via SIP. I know that CUE is a SIP destination I know that this can be do with H.323, H.450 ...
When you transfer a call to another IP phone and nobody answers the transfered call, can you set CallManager up to call the phone that originated the transfer?We're running 4.2Thanks,Chris
I m getting this error on my publisher (4.1.3sr3b) every few seconds. Any thoughts on how to fix this ?The Open Procedure for service "DHCPServer" in DLL "C:\WINNT\system32\perfctrs.dll" failed. Performance data for this service will not be availab...
I am attempting to implement RightFax Server FOIP ( TR1034+P30H-E1 ) with Cisco IP Telephony , our customer asking me if we can make a cisco router route the incoming fax to another fxs port - ATA - fax machine in case rightfax is down for backup sol...
Hi,I am integrating my Cisco 3825 router(with E1) with Nortel pbx option 81.Can some one give the url for the integration doc or post working config of the same.The Nortel PBX has NTBK51AA card at its end.RegdsNM
Hello,Is it possible to customize prompts by time and date only with CME B-ACD ?Is CUE absolutely need for this functionnality (avoiding caller to wait to and agent to be available whereas no agents are available at all)Thank you.
We have a small remote site connected to our main site and the call manager cluster is located at the main site. At the remote end they can here people fine but the other end of the call cannot here them well. It happens especially on calls outside...
Hi,I am running ccm4.1 currently users dial a 9 to get an outside line. Here is my problem. The PTSN sends all 7 digits so i have translation patterns set up to remove the first 3 digits. we just got a new exchange that starts with a 9. Calls can sti...
How do you configure ccme to interoperate with cue in separate device? Do you configure dial-peer for voicemail using sip on the ccme and point it to the cue address in the other router? What about MWI? Any configuration would help.
