Other Network Architecture Subjects

Hi everyone,I have been having some problems with upgrading an IOS in my 3640 router. The present IOS is 12.2 (23) , IP/FW/IDS plus 3DES IOS. This IOS doesnt support G.sHDSL cards, which I need now. The show version and the show diag of the router i...

I've got some floors in the building that just got upgraded with 4507 runnning the base layer 2 image, since they are access switches for users to plugin.I want to configure the marking portion of QOS on the boxes, configuring it at the access level...

Hi , I have the following requirment to integrate a PBX with a PSTN gateway router. There will be a ISDN PRI E1 connection from the service provider that will terminate on the 2821 router. Also there will be an E1 PRI integration with a NEC PBX also ...

Hi, I am trying to find examples for configuring CPU/Memory Thresholding and Control Plane policing features on the new 2800,3800 series routers. Has anyone been successful in doing this? Thanks,Rajesh

Hi all,Our basic netowork diagram is as below:melb office(192.168.6.0)-->(192.168.6.254)melb router(10.1.1.4)-->(10.1.1.1)syd router(192.168.1.254)-->Firewall-->InternetMelbourne router internal interface IP is 192.168.6.254;external interface IP is ...

Does anyone have, or know where I can find an example of a configuration for Remote Router Management (Out of Band) using one of the ports on a WIC-2AM? Thanks,Mark

Hello allI have a router with an ATM interface which is connected to a BAS for ADSL connections and I have configure IP NAT inside on the ATM interface. The router also has a Gigabit Interface with IP NAT out configuration. Due to some restriction th...

Hi,Is there a difference between the ADSL Port compatibility with DSLAMs for Cisco 836 and Cisco 837 routers ?In Cisco 836 Specs the WAN port is mentioned as "ADSL over ISDN" instead of just plain ADSL ?Is "ADSL over ISDN" a different technology as c...

Hi,Following info about PIX.Inside to Outside: If a user from the inside starts a connection to the outside (or to be more precise, to an interface with a lower security level), this connection will by default be permitted, and the return packets of ...

we have some WS-C6509 with IOS 12.2(18)SXD2how can i see the free/available DRAM-Memory of the C6509-Switch (SUP = WS-X6K-SUP2-2GE) ???there are 128MB installed:"sh ver"cisco WS-C6509 (R7000) processor (revision 3.0) with 112640K/18432K bytes of memo...

What will take place is I will have my 7206 pull a Dynamically assigned IP address from my Cable modem/gateway. The Cable modem will be connected @ Interface 1/0. I will then connect one PC to the 7206 @ Interface 1/6.The PC will need to pull an IP s...

My question is, what's the following log message means"Jan 29 08:56:50: %BGP-5-ADJCHANGE: neighbor 57.216.42.89 Down BGP Notification received FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 0015 0304 00"what's specificly FFFF means and the following numbers

I have recently installed metro ethernet between two sites. The speed is much faster when pulling vs pushing the file. I have tested using windows, tftp, ftp and a product called qcheck.

Can anyone tell me how to do the password recovery steps on the NAM-2 cards. We are using a Cisco 6509 (IOS) with a sup720 and ver 12.2(18)SXD2. Thanks for the help.