Other Network Architecture Subjects

Dear All,I hv searched the cisco site a lot but not getting the config for my specicfic requirement. We want to connect our branch office with our central site using Site-to-Site vpn between routers of Main site and branch office (Over Internet). At ...

http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa9.shtml#topic3Try to recover missing msfcs according to the above document but failed. The msfc lost due to the upgrade the image of bootflash.With switch console ...

can you confirm me about a clock limit on standard serial port at router 805 router, a friend is asking me about it,because his router is going to shutdown the serial port due clock exceed (exceed 512K).

Im working on a solution where a client has Netscreen 100 firewalls configured as the default route. Has anyone worked with this and if so what problems did you face by changing the default route to a cisco router?

As I know, once the tunnel is up, then it nerver comes down unless shutdown tunnel interface, the tunnel interface still remain up even the tunnel cable is plug off. Then how can I perform redundancy on tunnel interface by tracking the port is down?A...

is there a new commad in 12.3 for per packet load balancing which take the cpu load off?thanks...Jey

1- When I made change in Polling or thresshold section, it take 2 days before changes are apply.2- I received many messages every day that a device has a "NETWORK ADAPTER DOWN BUT IS SUPPOSED TO BE UP"I looked at my device and he is UP.Thank you.

I've got a monitoring client probe on a 2950 port. I've routed a path from the remote monitoring server to the machine where this probe sits and can actually PING it... but I cannot retrieve the data from the probe, I can't even connect to it!From...

Hi. I am considering enabling IBGP route reflection. I have three EBGP uplinks on three different routers. As I consider where and what routers to make the reflectors, do the EBGP-speaking routers have to be IBGP reflectors ... or can they just be cl...

Dear all,May I know do you have any experience how many stackable switches can have for 50 cm free stack cabel from top to bottom switches?Thanksmak

We currently use a Point to Point T1 to connect the Data and Voice networks of our two offices. We have a VOIP 3com NBX for our Voice. For some reason throughout the day the users hear static on the phones calls between the two sites. The voice tr...

I'm curious how well RME is for doing IOS upgrades?...Success or horror stories.

Hi Folks,On Page 173, Jhonathan chin Book (Frame-Relay Solution Guide), there is example called "Monitoring and Verifying Frame-relay Traffic shaping on Switched PVC)I used NetIQ Chariot version 5.0, to send stream traffic with the following script c...

We have a Sup1A-2GE and it came with 64MB DRAM and 16MB of onboard flash. We are upgrading the DRAM to 128MB in order to upgrade our CatOS to 7.6x, but it seems the flash is too small to hold the CatOS with the Cisco view options. Is it possible to...

I have a DS3 connection terninating to built-in DSU interfaces on 7204VXR at point A and 3660 router at point B.There are no errors on the DS3 circuit.When I copy a 200M file from point A to pint B the copy speed is 3 min. When I copy a 200M file fro...