Other Network Architecture Subjects

At first I installed the LMS2.2 and patch all the update and IDUs. The CiscoView works well. But one day when I tried to display a 6509, it failed. The CM and RME works well in the same time.The error message is below:Failed to receive response from ...

Hi Cisco,I think this question is addressing to Cisco. Just a general question to ask.As you know, 1721, 1750 or 1760 already has a FE port built-in. Do you have any plan to implement FE Network Module or FE WIC card in 1721, 1750 or 1760 routers as ...

After installing RTM 1.4 SP7 onto Win2k SP3, I get the message Login unsuccessful Check to see if nGenius services are running. I have uninstalled, restarted, then reinstalled to no avail. What else might work?

With a VoIP rollout we would like to re-address our entire WAN network. I had some questions regarding how subnetting would work at the various WAN locations.First off lets say every WAN site is given a /18 range, and various /23 ranges under that a...

Could somebody please confirm my assumptions on the operation of Jumbo Frames.1.) If two servers on the same VLAN are configured for jumbo frames they will communicate at the higher frame size.2.) If a client on the same VLAN does not support jumbo f...

Hello,I have a NM-16ESW in a Cisco 2612 router with an 12.2(11)T9 IOS running on it. I want to create a 802.1q tunnel (the feature navitor says that this set can do it) but I haven't been able. Any idea?Dan

I have a network consisting of several host routers that allow connections to smallers sites via Frame Connection. Also connected to the host routers(1751) is a Pix506E via the ethernet0 port. Currently we use serial point-to-point communication.This...

Hi all,I have cisco 2503 router,which i am not able to boot,even i am not able to enter in rommon mode.I am sending you the msg which im getting at last.pls find in attachement. pls help me in this regards.santosh

Greetings and thank you,Under what circumstaces would you use a 'routed port' instead of a logical Layer 3 VLAN interface on the 3350?I am particularly interested in the following implications:1. General architectural issues.2. Security issues3. CPU ...

Does anyone know if CMPC (Cisco Multipath Channel) on the CIP or ECPA supports IPV6?IBM is supporting IPV6 on MPC as of z/OS V1R5.

i have a FR hub-and-spoke network running EIGRP. Point-to-multipoint interface configured at hub router and point-to-point interface configured on spoke router. Recently, the eigrp routing table on spoke routers refreshed multiple times everday, FR c...

HelloI am trying to configure our Windows 2000 DHCP server to support Option 82 - Subscriber Ident. but I am unable to find any documents regarding this. I've got the Cisco 3550 switch configured to support this, but how do I set the server up. Th...

Hi,I have installed CiscoWorks LMS 2.2 on a Windows 2000 Server. My problem is NetScout server. When I enter the server name and port number into the browser, I get the main page. I tray to log on using the correct credentials and it would not let me...

Here is the secenrio.PC1 ----------- Router --------- PC210.1.1.2 ----------------------- 192.168.1.2(NAT inside) -------------- (NAT outside)Can I configure the router such that the connection from PC1 to an inside address(e.g. 10.1.1.10) would be r...

Firstly, apologies for the rather long post!Background info:We have 2 sites - Site A has 2 upstreams, Site B has 1 upstream - Sites are connected via fibre.We have a /20 allocated to usSite A is currently using the following /24's:xxx.xxx.64.0xxx.xxx...