Other Network Architecture Subjects

Hi Ciscoer,First of all I'd like to say Happy New Year for all of us hope more good things come into us for this whole year.I have WIC-2A/S dial-up when Frame Relay down. Can I set it up to dial to more than 1 number? What I mean is How to config to ...

my task is to manage cisco's 2948G switch using our Network Management System.I have decided to use "CISCO-STACK-MIB" for this purpose.Is my assumption correct?Switch has 48 10/100Mbps ports and 2 modular GigaEthernet ports with GBIC.But it does not ...

Hello :Somebody know anu tool to see load charge ( not command ) on Catalyst 6500 at different times.Thanks

I have configured Fast EtherChannel (FEC) on Cisco 7401ASR and Catalyst 3550 and it is working fine. However, FEC feature doesn't exist in Cisco Software Advisor. Does 7401ASR support FEC ?

Hi,We have 2 IPLC links to UK, one is a 512 link and thre other is a 2 Mbps link, we want to use the 512 link only for FTP and all other traffic should flow by the the 2 Mbps link, I know this can be acomplished by POLICY BASED ROUTING, my question i...

hello I`ve got a problem in my companywe would like to migrate the eft-pos (electronic file transfair) terminals, witch runs x25 d-channel directly to isdn b-channel (cisco router 3745) without a terminal adamterIn the old networks, the eft-pos termi...

Hi,I work for a Mobile ISP which offers GSM data connections terminated on AS5300 (e.g. WAP or HSCSD).Since now we have used a local pool of IP addresses defined on the AS5300 and now we are trying to implement the distribution of IP addresses via DH...

Can somebody help me answer the following ?1) If I have 2 class under a CBWFQ policy and one of the 2 is the class-default which I configure for fair-queue. WHat will happen under congestion if the other queue has a bandwidth percent 10 statement ? W...

Hi, There is simple troubleshooting doubht. HOpe you guys would have crossed this problem and can help me out.We have two different providers for point to point link. we are using PPP encapsulation, E1 link (1984Kbps - BW). When we connect provider A...

why my 'show interface serial x/x' result is:Interface is reset?

can 2621 connect to two different ISP ?. because i want to add more internet connection using my existing 2621. thank's

sh`s config:shanghai2610#sho runBuilding configuration...Current configuration:!version 12.1service timestamps debug uptimeservice timestamps log uptimeservice password-encryption!hostname shanghai2610!enable secret xxxxxxxxx.enable password xxxxxx!u...

Hi, does each root bridge mac address of each vlan which created on a single core switch the same? What will cause an access switch to lose 3x BPDU from the core with a direct connection?thanks!

I'm about to get a dual-T1 solution from a major telco. vendor; a connection to the Internet. They offer per-destination & per-packet options on CEF configuration. Question on per-destination: Let's say I have 100 people with 100 TCP connections o...