Other Network Architecture Subjects

HiI am using AS5300 and costomers are complaining about slow authentication and sometimes about slow browsing.I have output of sh log command.But I do not understand.What is mean by these lines. Can any one please help me.here is the excerpt output.A...

Hi I've got a chasis 4006 with sup- III. I want to move my servers to Giga speed. Please suggest a line card.I've come up with WS-X4424-GB-RJ45.kin

does anybody have an idea what this error means,#8, Test #44, Error #815<45> DIAG FAILURE: Device #8, Test #45, Error #802<46> DIAG FAILURE: Device #8, Test #46, Error #802<48> DIAG FAILURE: Device #8, Test #48, Error #900<49> DIAG FAILURE: Device #8...

We're running CWLMS 2.1 in a switched environment that includes Cat-6506's, 2980G's and 2950's. We have successfully added all the switches to the RME and configured the DFM to collect the inventory from the RME. That worked, except for the Cat-2950'...

Hi,I have a situation to connect a overlay network with 3550,to the existing 2meg links via 3640,and to core switch 4506.I was hoping to connect the 2 gig ports to the 4506 and make them a trunk ports,and allowing the Vlan`s within that building. pre...

I have configured CW to send an e-mail for specific messages to my pager and email account. I would like to change the default e-mail topic from "SyslogAnalyzer Action Script" to that of the device which sent the message. Is this an easy thing to do?...

I'm trying my best to get my Dell and Cisco switches to talk via two SX GBICs. DELL to DELL works, CISCO to CISCO works, but not DELL to CISCO!!! HELP!

Does a 3550-12G do Policy Based Routing in hardware?

Biggner....When i try to write to memory it gives me an error saying I need to be in text mode. ???Does the 6509 auto save to memory? What's the proper procedure for saving any changes? Thanks.

In a 6500 with 2 supervisors and msfc in hybrid mood ... I was doing upgrades and tests this evening (customer request) and plugged out the primary active sup from slot 1.At the same time I had a ping going (from 2 pc's, 1 on vlan 1 and another on a ...

Recently I have a SOHO 71 in my possession. After configure VPDN enable without no success. I decided to reload IOS image. I use console download by using Xmodem. After success download, router reboot and then goes in cycle that keep rebooting itself...

Hello,I would like to know why in the new IOS versions, the "virtual-profile aaa" command cannot be used because it is now an automatic action?This implies that the Virtual-Profile is mandatory cloned from the AAA, even if we don't want to clone from...

We are looking into the idea of dropping our Frame-relay links and getting our small sites to use ADSL, with a backup of ISDN. What is the best way to configure the cisco routers?1603 router is connected to a lan, ISDN, and at moment frame. if I put ...

Hello,i need information, whitch i the best way to use V.110 Protocol.Whitch Hardware can i use. Does only Cisco 36xx support V.110? Or can i use other Hardware?Thank`s Frank