Dear All,Can anyone tell me is there different between the WIC-1DSU-56K4 and the WIC-1DSU-T1,can the WIC-1DSU-T1 replace the WIC-1DSU-56K4?Thanks very much
Dear All,Can anyone tell me is there different between the WIC-1DSU-56K4 and the WIC-1DSU-T1,can the WIC-1DSU-T1 replace the WIC-1DSU-56K4?Thanks very much
Hi.I need to set a computer on the DMZ so it has a static routable address, that together with runing NAT on the same router. I use a 1750 with 1 T1 card. Is that possible?Thanks in advance.Amir
Does Cisco have a white paper that I can present to the customer that shows design recommendation for WAN ports? I'm specifically looking for something that shows a recommendation to design no larger than an average of 70% utilization and the abilit...
We lost the ability to logon to terminal services (NT4.0) and Exchange (5.5). I have a vpn site-to-site tunnel between the two offices (Hong Kong) and both servers can still be pinged. I'm being told from my tech in HK that the ISP has blocked port 1...
Has anyone ever configured an IMA card and configured it on a 3620?
Hi thereI have a2924 xl en switch and i set all the ports to 100 and duplex full. here is my question how can i use it as a hub to hub link using a plain ethernet cable the blue ones and a normal hub with uplink. any help would be appreciated
Is there a way to tell how many connections your firewall PIX 520 series is licensed for?
Does RIP support triggered updates in the same way as IGRP does ?
Hi, I've got a problem with transfer of long sized (80 - 100 GB) files via FTP between two Unix servers. Two servers are on different sites and LAN connections to local routers (one is 2610 and the other is 3640) are fastethernet. Connection between ...
We are faced with a problem on our Cisco OSR Gateway router. The GE-WAN interfaces on this routers are highly utilized so we have to use 64 bit V2c counters to get the correct in and out counters. Our MRTG config has not changed in a while and we are...
We have a 3745 router with eight 28.8kbps analog modems on POTS lines and six digital modems (56K capable) attached to three ISDN BRI lines. The router functions as a small dial-up access server. It uses Windows 2000 RADIUS (IAS) to validate userna...
I would like to set up policy routing to track my customers IP traffic. This customer will have a T1 line that connects him to my network and he will have equipment co-located on my network. I would like to charge him only for the T1 traffic to the I...
Hi, I´d like to know how many servers are supported by IOS SLB 12.1(13)E9 in a Cat. 6506.Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
11-14-2024 09:33 AM | ||
10-24-2024 11:51 PM | ||
10-20-2024 10:52 PM | ||
10-07-2024 07:08 AM | ||
09-26-2024 02:28 AM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |