How do I see DS-1 bandwith utilization on a 1720 serial int? I don't know which IOS, but it is at least 12.X
How do I see DS-1 bandwith utilization on a 1720 serial int? I don't know which IOS, but it is at least 12.X
Have an MPLS multi-VRF core network with Internet access today within the VRFs. An Internet facing 7507 router with partial Internet Routes originates default route for Internet 1 traffic into the VRF's, and a VRF attached CE router will follow this...
i have a router configured example as belowethernet 0ip address 131.108.1.10/24 ethernet 1ip address 10.129.21.0/24serial 0ip address 10.3.100.1/24-----------users in ethernet 0servers in ethernet 1servers also behind the WAN and belongs to 10.129.35...
When we do RAS and gets to the login window, I have to hit enter to get the user login prompt then to the password. Is there a way to set this up that when the window comes up it already has the login prompt waiting?Thanks,gilbert
I need to inject default route to some customers which are already organized in peer-groups. Unfortunately all IOSes i have tried (12.0, 12.2, 12.0S) deny it saying: % Invalid command for a peer-group memberOn the other hand http://www.cisco.com/en/U...
Hi,the ticker window in our Cisco Works 2000 is not updateing - my assumption is that this has something to do with our internet access which is using a proxy. Proxy Server was entered in "Resource Manager Essentials > Administration > System Config...
I'll try to Update a package using "CCO upgrade" and "Upgrade packages based on what is currently installed ".The only package selected is "Cat6000 new V2.0 old V1.9".When trying to update the following Error occours:"Following packages cannot be ins...
I have remotes with two paths to the host destination. Both paths are T1. One path is one hop and the other path is two hops. The one hop path has half of its bandwidth allocated for video when there is video traffice using CBWFQ. A CCIE told...
Hello i want to connect two routers through dynamic routing as RIP on first and OSPF on second.although the autonomous numbers are different on both routers along with the routing protocols,i just want to know whether it is a good approach to ...
My sale make mistake ,Order a WS-X6K-S2-PFC2 supervison engine for Catalyst 6500 ,But I need ip routing on Catalyst 6500,Can I order a MSFC2 Card to update WS-X6K-S2-PFC2 to WS-X6K-S2-MSFC2,Or I just can replace WS-X6K-S2-PFC2 to WS-X6K-S2-MSFC2.Hope...
I was very surprised to know the basic NAT feature is not supported on Cat4 SUP III. Anyone knows when it will be supported?thanks
can a 6509 be managed via http??is there another tool i can use to see a visual diagram of the 6509 besides using CiscoWorks??i am trying to map out a network which has VERY little documentation.....i want to see what vlans are config'd / used, what ...
I know there was a set of commands for downloading an image from tftp server in rommon mode. Something like tftplnd ... ???Can anyone help?Pete -
Greetings,I would like to set up aaa authentication for ppp authentication only for my dialup connection. Can this just be done with the:aaa new modelaaa authentication ppp default localUsername modem password modemOr would require additional aaa co...
dear engineers,we do have cluster mail server with a single virtual IP address. whenever there is a failover happens remote clients cannot connect to the current active node. the router dont know the mac address of the new active node , untill it ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-07-2024 06:15 AM | ||
07-17-2024 11:08 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM |