Other Network Architecture Subjects

Hello Forum, I am using AS 5300 for dialup.My billing/Radius server is on another location which is connected on digital radio link.My problem is that after some uptime radius stop pinging my access server and access server also stops pinging Radius,...

--begin ciscomoderator note-- The following post has been edited to remove potentially confidential information. Please refrain from posting confidential information on the site to reduce security risks to your network. -- end ciscomoderator note -- ...

Hello,Is that normal if I do a reload of my 3550 that the clock is lost and that I have to manually set it again ?Also, how do I do when in Cluster to be sure that the cloch of the master switch is well distributed to secondary switches ?Thanks

I have a remote site (site 2) connected to HQ via 256 k lease line.HQ -> site 1 --> site 2 (3660) (3640) (2620)Ping dropped out of sudden for a short period if ping continously.e.g if i ping continously (ping -l) to HQ...

I have a few 6513's. On the ones I have currently in production, they are using CAT OS(or Hybrid). In those switches I have configured HSRP just fine and would like to run HSRP on another network(with a switch that has native IOS). I am a liitle ...

could you tell me if the super 720 and ws-svc-nam2 work together in catalyst 6513 ? thx

Hi,Which MIB would give the card,(modem card, trunk card) port level details ofCisco Dial shelf?Thanks-Bhaskar

Hi, We want to limit the usage of hhtp type traffic in our brancheson FR(256kbps or 512kbps( in any case). I know CAR rate limiting and also policy based rate limiting can be a solution. But When I implemented car rate limiting feature to router I di...

Dear Expert,Think I can not catch any clew from the boot message.My catalyst 3500 XL is not working .When I enter with console cable then the following message is repeated .Please suggest me for recovering the trouble. the messages is as follows:::...

We have multiple 6509's and 4006 swtiches in our campus. Each 6509s have dual sup2 with MSFC2/PFC2 and 4006s have sup2 with 4232 L3 card. At present we are running Hybrid OS (CATOS + IOS) configuration on 6509s. I understand that we can also run sing...

Hi all,since I have a CISCO 801 Router the problems never ends. I´m not able to configure the Router so, that he connect to the Internet The first problem:When I use CISCO Fast Step Setup, the program need an info like Switch Type. Not the technical ...

I have NM-30DM at central router, to use as a dial backup device for lased lien connected branch routers ( about 150 branches).Here I have pool of modems to share with all the branches assuming maximum of 30 concurrent link failures.These branch rout...

Hi, Per se I've following scenario, (AS 100) (AS 300) (AS 200) RTR-A<=========>RTR-C<==========>RTR-B (160.20.0.0/16 ) (160.10.0.0/16) ...