Other Network Architecture Subjects

Yesterday we moved a Cisco 2621xm Router from our main office to a sub-office. The router was working fine for about three months in our main office, but when we went to hook up the router at or sub-office we get connectivity for about 5 minutes and...

I have recently set up a BGP to OSPF redistribution, all is working OK. But I cannot explain the following: If I show ip route I see the redistributed routes as BGP routes, I would have expected to see these as OSPF routes which have a better Admin d...

I have a request that a remote subnet is not allowed onto the rest of the corporate net but everybody else can get in.Is this possible?Something like:-deny 172.16.40.0 0.0.0.255 any (where 172.16.40.0 is the remote net)permit ip any anywont work will...

I know this sounds crazy but are there any tricks that can make this situation work:We are getting ready to packup and move our existing infrastructure to a new site. Both sites are within a structured "corporate" WAN. We want to move certain server...

I have several Cisco routers and switches that I have verified the read/write community strings on the devices and in CW2K but I continue to receive "INCORRECT" in the Device Attribute Errors Report. Any known fixes ???

What is the difference between the WS-X6500-SFM2 and the WS-C6500-SFM?Why would I use one over the other?

Hi,I am trying to add the switches in RME into nGenius. I've followed the instruction in the online-help but when I execute nGeniusCiscoImport.bat I get errors like : [13:41:49]FileLoader:Error Inserting Cisco Switch Record: com.sybase.jdbc2.jdbc.Sy...

I have a WS-X6380-NAM Sw : 2.1(2) in a 6513 Sw : 7.3(1), after changing the root password from root to my own, I can no longer log into the NAM module as either root or guest using default passwords or my own password.I have performed a "clear module...

After recovering the ANI database two weeks ago, User Tracking discovery seems to be stuck in discovery mode. It hasn't updated any records since the re-init, and when checking discovery status it says it's discovering and that status never changes....

SUP1 shows Pinnacle error and continually reboots itself, have tried loading new IOS with xmodem but it will still not boot. Problem began after installation of a WS-X6348-RJ-45. Cannot get to console at all can anyone suggest a resolution. Thanks D...

Could someone please help me out and let me know what this could potential mean.************************************************************************************FastEthernet3/25 is up, line protocol is down (monitoring)****************************...

Hi there,I have a litle problem im implemeting a LNB (loading balacing) in a 3500.Is a DMZ area but i need to implement a bit of security.So i created some mac-address statics like thismac-address-table static abcd.abcd.abcd source-port destination-p...

HiI have read RSVP use WFQ to allocate resources and since IOS 12.1(3)T it can use LLQ too.But what happen if we are not ussing WFQ in the same interface that we are ussing RSVP?I have tried it and it seems to work. But why? can I use RSVP with any q...

Here is the situation... Due to a recent security issue, the powers-that-be would like to set up an ACL and log the traffic against that ACL to syslog. We are running CiscoWorks 2000 on a Windows 2000 server (unfortunately - thats another story). ...