Other Network Architecture Subjects

Dear friend It concerns an internetworking solution that we have configured for an electrical company constituted with 3 buildings, A, B, C. In order to link them we have used 3 switchs : catalyst 6509 on Bloc A, catalyst 6006 on Bloc B, catalyst 35...

My wins servers are not replicating, and according to MS event id 4202 the router is blocking tcp port 42.MS fix recommends forwarding of TCP port 42.Is this done with an access-list or using the ip forward-protocol?

Hi all,When seeing the doc for mvr, I think that it works the same function of igmp snooping and I don't know what difference between mvr and igmp snooping in function. Can anybody explain when should I use mvr and when should I use igmp snooping?Tha...

Fresh installation on a WIN2K platform running SP2.After installing CD One 5th Edition and the server was rebooted.Received this in cw2k's error_log file; [Fri Jan 31 11:48:26 2003] [notice] jrApache[init] mod_jrun: JRun Connector v2.3.149 static Ap...

The "show top" command in the Cat OS ('set' switches) was very useful. I'm trying to find a similar utility for the new switch platform. Any input on this would be greatly appreciated.

Does anyone have any experience with Committed Access Rate (CAR)? I have a 2651XM and need to dedicate a certain % of Bandwidth to one FE port and give the rest to the other FE port. Any suggestions or help in configuring would be appreciated.

We have a customer who wants to baseline his vlans on a Cat 5500. When we span a vlan to a port (fastethernet) the Citrix users on any vlan complain of dropped sessions and timeouts. Is Citrix a time sensitive application and is the increased load on...

I want to monitor my DSL router (677) on CW2K, i searched the package and found nothing. Is it available? has someone found it?Thanks for the help

I am new to Cisco swtiches. I need to know how to configure the switch in a network and how to configure two vlan sets 12 each in a cisco 24 port switch. Can some one assist me with some getting started documents and from there to configuring VLANS....

i have a 3640 with primary isdn and mica modems providing 30 lines of dial in access for isdn / analogue users.is there a mib variable i can use to send an snmp trap when a percentage of the lines - say 80% are in use.any suggestions would be appreci...

I have a cisco 3640 set up with sub-interfaces, I have issued the "shutdown" command on a sub-interface but I still see high utilization on the interface through my monitoring system. How is this possible?? I thought maybe this connection had an unpa...

I am getting a console message of:18w6d: %SYS-2-MALLOCFAIL: Memory allocation of 1680 bytes failed from 0x13CC08, pool I/O, alignment 0-Process= "Pool Manager", ipl= 6, pid= 5-Traceback= 17A57C 17BA24 13CC0C 18746C 19A194on a cisco 3550 12G with a IO...

Hello, Which protocols does SLB support at the moment? Is there support for any app protocol running over TCP ? For example FTAM support?Thanks.

i have 2 admin folks, but one of them is ONLY concerned with what goes on with the WAN / Remote offices. I'm currently having pages and emails sent out for all problems to both folks. Is there a way to send one person all alerts, but only send the ...