when i try to insert X6516-GE-TX Card on any of slot of 6509. the card shows amber color.i have tried this is two different chasis, same problem.L2 card : WS-X6K-SUP2-2GEIOS : cat6000-sup2.6-1-1d.bincan any one tell me where the problem is..thanks
I execute sh log and I found that:Jan 24 14:06:33: %SEC-6-IPACCESSLOGP: list 101 permitted udp 10.10.1.15(138) -> 10.10.1.255(138), 1 packetBut I don't know what is it, and what are there a lot of traffic UDP, we have a Ethernet network and we work w...
I want to change the cam ageing time on my switches to 30 minutes or more for management purposes (I need to monitor where devices are in the network, but not all devices are actively communicating all of the time). What is the potential impact of c...
We currently support 2 typse of Adapter Teaming on INTEL and 3Com server NIC's - Load Balancing (1 in many out) and Fault Tolerance (multi NIC but only 1 at any one time).Customer is upgrading to Cisco and VLAN's/FEC. We have servers at Cisco and Nor...
I have a catalyst 4006 with sup2 module. The sup ports are at gig speed.I am trying to upload a image from a production switch, which I have, then distribute it to the switch that is about to be deployed.When I try to distribute, the software keeps ...
I was wondering if Cisco has published any information on how much latency/delay (usec) there is with the following modules/cards for Cisco Catalyst 6509 Switches: o 16-port Gigabit Module (WS-X6516-GBIC) o 48-port 10/100 Fast Ethernet Module (WS-X65...
I have a cisco 2610 running IOS 11.3 (2) and I want to know what I can do with it. I want to have three servers behind it which I want to be seen by the outside. I also have a network that I want to be able to browse the Internet through this router....
Our network works with TCP/IP, when I create a new rule on input ACL:deny udp any any log, I say a lot of packets UDP by my network but I don't know why or when is traffic UDP generating.We have in our network, DNS server, WINS server, Proxy server, ...
I'm using Linux. Previously I used windows Hyperterminal to access my router through serial cable.I've tried many programs such as mgetty and minicom to access my router but I still could not. Maybe my configuration is not right. I used 8 bits, no pa...
Does anybody know if Caller ID Name display will ever be supported on the 800-series routers (specifically the 804) and why it has not been supported so far? Does BRI signaling pass caller name?
I have 4 7500 routers on my network running 12.2(12a) with dCEF enabled. It appears the CEF is functioning fine on Token Ring/Ethernet/Point-to-Point interfaces. However, it appears the majority of my frame-relay interfaces and sub-interfaces have ...
i have nat set up on a router and i cann't reach ebay from it. although i can reach it from an computer not running within the nat network. could this be a dns isssue? and if so what would i have to do in order to fix that problem?
when I study some materials about QoS,there are two confusing conceptions : flow and traffic.What's the main difference between themAny help will be appreciated
