I have a network with a 7204 at the centre and 1750 series at the edge. I want to implement NBAR for Citrix traffic. Does the 1750 support NBAR and if not can I just employ NBAR on the 7204 and effectively control Citrix traffic?
Greetings,I know that CISCO CIPs function with CISCO 7500 series routers. Can the CIPfunction if installed within other CISCO devices as well? If so, what are thealternatives.Thank You,Kris Scherz
The HTTP server running on all Cisco devices is open to the same vulnerability that Apache is . I have 1 Campus of 8x4006 and 2x6509 that fell over and reloaded , when a security engineer was testing for the Apache Vulnerability. I have looked but se...
hi,i have had some devices which i have imported form my NNM into RME at the time we didnt have them listed in dns ,so the device names were listed as there ip address`s ,now they are listed in DNS is there any way of changing the device names ONLY
Have cisco released mib(s) for collecting the IP NBAR protocol statistics yet ?I have a customer who wants to identify the protocol mix on several linksThanksRobin
Recently we have been looking into replacing our FEPs. One thing that always seems to present a bit of a stumbling block is the lack of an adequatesolution for SNI connectivity. We have implemented CISCO's CIP "one-sided SNI" with a couple of our S...
Hi AllI have a few 3640/3660's not running CEF at the moment, should I enable it and will it significantly improve performance. Any thought would be appreciated.Regards
Hello Gurus...Just wanted some clarification. The 16-Port Gigabit Ethernet Switching Module (WS-X6516-GBIC) does require that I purchase WS-G5484s (1000BaseSX or some other converter component) to use this module for fiber giga connects?Greg
Fellow Engineers,I've got a conceptual question that I've been wrestling with due to a customer inquiry....I recently had a customer inquiry that stated that he was getting roughly only 1.5 mb transfer speeds over his 2 T-1's to the internet. Exclud...
Is it possible to log keystrokes on a router, and have it sent to a syslog server? The reasoning is to keep track of changes in the router configuration as well as for security.
Hi,I have an AS5300 with IOS C5300-IS, Version 12.1(9) and portware 2.7.3.0.Exist it in Cisco a compatibility list of MICA modems vs. other manufactures?Thanks,// Waldemar Pera
Dear sirs,I have a lot of problems working on tenders because an usual requirementis to list the MTBF parameter of the Cisco devices offered.Please, someone can give me some more clarifications about this problem ?Why this parameter is often omitted ...
Bare with me im a newbie to cisco products.I am planning to replace our hp hubs and switch with cisco equipement. I have a cat 3550 and a cat 2950 for testing. I am planning on using 2 48 port 2950's, 1 24 port 2950 and 1 24 port 3550.I would like...
