BST: %IOSXE-2-PLATFORM: R0/0: kernel: EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 3170306 BST: %IOSXE-2-PLATFORM: R0/0: kernel: EXT2-fs error (device sda1): ext2_lookup: deleted inode referenced: 3170329 BST: %IOSXE-2-PLATF...
Forum Posts
I am setting up a C1111-8PWA-WS for the first time. After not being able access the internal wireless card I decided to set up without it. I have a Cisco SG350-28P switch that has POE for the AP's. Trying to set up the basic unit with just the rou...
Been working on this topology for a little while in preparation for ENARSI second attempt. Created a small MPLS network with 3 PE routers connected, the loopbacks are advertised and seen on each CE router. Despite route showing, pinging fails and...
If we have a circuit between two routers and have eigrp and static configured, which route do they prefer? As I know :EIGRP has an administrative distance of 90 for internal routes.Static routes have an administrative distance of 1 by default.Since a...
Hi, I have a ISR1100 (C1111) with two connections: fiber (GiE0/0/0) and LTE (Cellular0/2/0). Config excerpt:ip route 0.0.0.0 0.0.0.0 100.64.107.1 name primary track 1ip route 0.0.0.0 0.0.0.0 Cellular0/2/0 10 name backup!ip sla 1icmp-echo 8.8.8.8 sour...
Hi, we plan to purchase catalyst 8200 routers, but from CCW, there are multiple image options, like universal xxxk9.176, xxxk9.1176 Can someone please advise what the differences between these images? How to select ? thanks in advance!
Thank you for your help.There is no power button on the Catalyst9000 switch, but is it okay to pull the power cable out of the switch when it stops?In the case of a ISR4000 router, a soft shutdown is required by the reload command in advance, but I w...
You are attempting to activate your license in a CSSM offline manner.An error occurs when exporting a RUM file.Do you have a response method? Model: C1111-8P Router#license smart save usage all file flash:test_rum.txtThe requested item was not found ...
This is very high level, wanting to know if this is possible. We're the middle man. I don't have access to or knowledge of equipment or configs on the other providers. Currently we are handed off a GRE tunnel to a router. We have an ipsec tunnel ...
We have a FlexVPN Setup where Spoke2Spoke connections get created dynamically with the help of virtual access interfaces. So if i want to edit something within a virtual-template, i get the error that it is locked: router(config)#interface Virtual-T...
je trouve cette output anormal, que pensez vous SVP de l'état ospf dasn ce cas :O E1 10.232.51.3/32 [110/53] via 10.4.151.2, 12:16:54, Port-channel20.1017[110/53] via 10.4.151.2, 12:16:48, Port-channel20.1017[110/53] via 10.4.151.2, 12:16:54, Port-ch...
Hi.I have one Cisco ISR 4321. This is a brand new router and I am the first owner.I have encountered the following fault since the first start up:It keeps restarting at random intervals. Sometimes after 10 minutes but sometimes it lasts for 2 hours.T...
Hello Everyone I have to set up an ipsec tunnel with Lo0 as source of tha tunnel. Nat is activated in My CE and in the ISP level (NAT444)All ipsec and Nat configuration is ok but, and as I know that for the NAT to work correctly, the packet should pa...
Hi Experts,Today when I am learning our company's routers configuration, I found that a Port-channel is in L3 and it is in VLAN490 as below:interface Port-channel1.490 description To_CP01 encapsulation dot1Q 490 ip flow monitor NETFLOW_MON input ...
Hi,we are using the Cisco ASR1001-X as core router on our ISP network. For the management of the CPE I set up a TR-069 ACS server. For testing purposes I configured the ACS URL manually on the CPE, which works fine.However I'd like our ASR to pass th...
