Routing

Hi Guys,One of our clients had a poor ADSL connection and the ISP checked on it and advised us that the ADSL is currently not on ADSL2+ ( which I could verify from the router ) and they changed the connection profile from their end.After the change, ...

Greetings,i have here an cisco 881 router which has been in service for about 3/4 year now.yesterday the device from one moment to an other stoped workingthe device does not respond on console, it does not boot (or seems to be booting)and is also not...

I am using a Cisco DDR2200 Router supplied by Centurylink for home TV and Internet. I have set up and enabled the USB port and installed a thumb drive. The router menu for USB displays correctly the contents of that USB drive I have installed. Everyt...

Dear Sir/MadamRecently Google just deployed Google Cach Server (LGC) in my network and peering to reduce traffic and fast respond to end users.but my config seem not work fine, that's why most traffic still go to Internation instead go to Google Cach...

            Hii understand the difference between (ip classless) and (no ip classless)     but i wonder is there a senario where we may need the (no ip classless) command !if no so why it exist? why we don't say that in all cases we are (ip classless...

I'm currently labbing a scenario in which I'd like to remove the Private-ASs that are within NLRIs that I'm sending to an EBGP neighbor. The issue is complicated by the fact that within the existing NLRIs, there is a single Public-ASN amongst the pri...

Hi,Lets say I'm configuring a regular router that stands between an internal network and the Internet, but I would like the internal network to have its own VRF (INSIDE) and to have the Internet its own VRF (OUTSIDE).Assuming that my WAN address is s...

                Hi,ISP has delivered the MPLS link on the MUX, Now we i am going to extented the cable from mux to cisco Router with the serial interface with RJ48 connector.Please let me know which cable should i use to extend the link Striaght or C...

Hi,I am trying to get DMVPN phase 2 working, I have recently decided to change all of our spoke routers default gateway to go over the DMVPN tunnel back to the hub. I have done this to reduce the admin work on firewall rules to the Internet and have ...

We have frame relay T1 circuit at one of our remote site. Which is connected to our core frame relay router which have DS3 circuit.Now we bought second T1 line at remote site and now I have to configure Bounded T1 with Cisco 1921 router.Can some one...

Hi everyone,I wanted to ask that when mtu is set to 1400 in GRE path then maximum data size packet allowed is 1376(1400-24).Shouldnt it be 1348(1440-24(gre)-20(IP)-8(icmp)).

Hum.... this is a headscracher...  I have the latest IOS for the 3560 switch.. I'd like to boot the switch and have it download the ios from my TFTP server during boot, thus running the updated IOS, instead of the IOS which is in FLASH.              ...