Routing

Question,I am pinging a host from Nexus 7K.  I'm losing every 200th packet when I'm pinging the end host.   I don't see any issue with network connection.Does anyone have any idea in this kind of behavior?Thanks.

Does Nexus 7000 support ipv6 6to4 tunnel?Thanks.

Hello, I'm trying to get an internet connection through my cisco 877va but I can't get access. I can see DSL up, however, the dialer0 interface can't get access to internet. Here is my configuration:Router#sh conf           Using 2140 out of 262136 b...

I have a lab environment with 1 router and 3 switches connected via ADSL and I have setup NTP server on the Routerntp update-calendarntp server 194.35.252.7and i want to broadcast or multicast (preferred) and enable the switches to configure there cl...

Hi,I have redistributed RIP into BGP. Also, I have set a default metric = 55 for the BGP.I faced a strange behaviour. All the RIP learned routes are redistributed into BGP with metric = 55.Besides these the subnets of those connected interfaces are a...

hello,Two questions. 1) understood that we have 1st 64 bits to identify the network ID (global routing and subnet ID) and the last 64 to identify the network identifier. It seems like an awful waste of space to use the last 64 bits. Can the netmask b...

Hi guys,This question is about a Cisco 871, which has no bootable image in flash.The device is currently in rommon, and i am attempting to copy the correct .bin file over from usbflash0: but recieve the following error:unable to stat usbflash0:/: per...

Hi Guy'sI have a problem with reload, I am developing Cisco TCL script to manage the Cisco Routers and Switch with our Application. Can someone help me how to display the Cisco Message? The following example reloads the software on the router in 10 m...

IGMP Snooping configuration for Multicasting on Cisco Catalyst 3020Hi Guru,Our switch model is "Cisco Catalyst Blade Switch 3020 for HP"We are building HA (High Availability) Databases infrastructure.Currently, there are two nodes(hosts- servers) and...

Hello All,Can someone tell me if I can bundle 2x2MB E1/T1 cards to get one on cisco 2900 series router. We have purchased 4MB speed from the ISP so we need a device that we can use in other to maximise what we have paid for.Is it possibe to use 2900 ...

i have an ASA 5520 runnng 8.4(1)it has the following interfacesWAN - public IPDMZ -  public IPProd - 192.168.1.Xfor internet access i have the following statementobject network Prod_Subnet_Internet nat (Production,WAN) dynamic interfacedo i need a si...