Routing

We have a Cisco 2811 router on which the customer has forgotten his password. He has a saved config on the tftp server and when we look at that file he has the following command configured:no password recoveryservice password-encryptionSo when we try...

dear all ...i have cisco  Router ASR 1000 .. i configure it ... i need to connect using PPPOE through gigaethernet ....the error 720 appear to me so where the problem ?????????Router#show running-configBuilding configuration...Current configuration :...

Hello all,I have DS3's to two different providers.  Each is hosted on its own 7206.  The 7206's are connected to each other and both connections to the internet route traffic in and out just fine.  Failover between the two is working as well.  The is...

Hi All,How can we use the ip default-network command in real world scenario.  Any real world scenario with internet in picture will be better.Thanks,Ravi

I'd just like to get a proof-read from you techies... make sure I haven't missed anything before I send out this router.FYI, I'm shipping this router to a branch that currently has a 2811ISR in place... connected to our MPLS wan. It currently has thr...

I want to limit the Outbound FTP access from my internet LAN. Is there any way to limit the outbound FTP traffic, also i already have an extended ACL applied on my WAN interface. Please let me know how to limit the traffic .Thanks

Hi, i am trying to find out if it is possible to have a translation rule fail over to a second server if the primary is down on my cisco pix515eso for instance having an external ip address of 82.x.x.x mapped to an internal ip of 10.x.x.1If 10.x.x.1 ...

I am looking at this doc to use an ASA + 2911 to do Policy Based Routing with multiple ISPs.From the linked doc, under the PBR scenario, what should the IP addresses be for the routers connection to the ISPs?  It isnt labeled.Thanks!

Hi AllWe have centralized all our servers in a Datacenter at our Headquater.We have 9 Branch offices connected with a dedicated layer 2 fiber optic connection. The Branch Offices have 1812 routers, and in our headquater the fiber optic connection fro...

Hi, allI'm new to both this community and Cisco in general.  We've just put in an 887 router/firewall appliance to protect our Win SBS network.  All seemed well - we've used Cisco Config Pro to set up the firewall zones, NAT and ACLs.  I've got a ser...

Hello All one of our client has cisco 861 router and they have two internet connections from two different ISPs can we use them together as load balancing and as redundancy, As ciso 861 router has only one WAN port, Any one of you have any idea, how ...

Hello alli have 2 routers connected by 2 links to each other , first link is serial link ( R1----->R2 ) and second link is GRE Tunnel "DMVPN" ( R1---->R2)and the ospf is enabled on boot links.the problem that is i have asymmetric routing in R1 we rea...