Routing

Dear all,Normally, Vlan 110 is the best route between Multicast server and Multicast client, and so Multicast also follow the best route to run. Therefore, I can see that the Multicast source is from Vlan 110 in VSS. However, If I statically add "ip ...

Is there a soft client to connect into a 500 series router or do I need another 500 series router to connect the the VPN. Looking at the product info it looks like I'd need another router. However this would be crazy for traveling employees.

Hello Guys -How are you guys.. Apprently i am having some issues with router advertisements to our MPLS cloud.Diagram : MPLS Cloud ^^^^PE C:PE MPLS router ^^^^CE B: Main Core router switch ^^^^ (point to point ip connection - /30)CE A: Prestag...

can some one explain or provide scenario on how Supervisor Engine Model works and maybe provide and example ..Thanks

hello,I have a 6509 with two paths to the same place with the same metric, I don't want to load balance due to the type of wan accelerator that I am using. Can anyone tell me how the path is then chosen? and how often it changes or why? such as do...

I have a 5Mb/s circuit. I have sublet 2Mb/s. How do I guarantee my sublet their 2Mb/s yet allow me to utilize above 3Mb/s if the sublet isn't using 2Mb/s i.e, WFC, WRED, Priority queing, custom queing, traffic-shaping, rate limit et cetera? My ISP do...

Hello,I have received a 2811 from a lab, and now it does not shows the boot process, nor the rommon, and does not respond to anything. I have tried with all the console speeds.Any idea??thanks

Hello : I receive this error msg whenever I do copy run start on 7206VXR router .I have 150 routers in our network and all of them I see this same behaviour.All are runnng IOS version 12.4(8d) and 12.4(8b) IOS version .RegardsArjun

Hello All,We have started getting the below error after a network hit.Below logs are observed in the device:*Jul 6 00:45:32: %SONET-4-ALARM: POS1/0: B3 BER below threshold, TC alarm cleared*Jul 6 00:45:34: %SONET-4-ALARM: POS1/0: B3 BER exceeds t...

Hi,Would like to know does 3560 and 3750 support HSRP with ip base licenses or not?What about VRRP or GBLP on the same switches.Reg,Sushil

lately i'm starting to see networks as such that 2 sites with different BGP AS has backdoor connection between the sites. The preferred routes between the sites are via backdoor link. The CE on both sites are doing BGP with ISP and IGP on the inter...

any sample config to achive lan extension redundancy between two sites ?Thanks

I have tried to enter the "no ip http server" command and the "no ip http secure-server" commands and I still see http connection is enabled on the router, see below:HTTP Client Connections: ========================Persistent connection = enabl...