HI allI have 2x cisco routers connected back to back with an ethernet connection to my cable modem. The router connected to my cable modem is configured with irb and setup as a transparent IPS. The second router is configured with the new cbac zone...
Hi,I'm trying to setup my 827 to be transparent between ADSL and ethernet. So I get the one public IP assigned to my firewall.I found <http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_c/wcfppp.htm#wp1005835> and tried the ...
Hello Experts I can not figure out what is the correct syntax on my acl to allow my Fa0/0 interface to receive the ip address by DHCP. My ISP is giving me the ip by DHCP and I can not get the acl correct. Has anyone configured this?Thanks, Randall
Hello,I have a Cisco 7301 running release IOS (tm) 7301 Software (C7301-K91P-M), Version 12.2(18)S11, which has some updates available. The device has been stable for over a year and a half, but our traffic volume has been growing. We have 3 transit ...
Hi,I have a Class C IP address assigned by our ISP.I need to segregate the networks into 200 hosts on internal lan and 50 hosts on DMZ lan.Can you let me know, the subnet mask that I need to assign for the internal and DMZ networksThanks,Chandru
I am trying to get 2 WANs to communicate with each other at 1 site. There are 5 sites in all (Central Site and 4 Offices). WAN1 is a Frame Relay to the Central Site. All of the routers on this are 3Com Routers.WAN2 is a 56k Connection that is esse...
Customer has an E1 interface that is diplaying the alarm "Transmitter is sending remote alarm", we shutdown the interface, but alarm is still there. We didn't remove the cable. Does someone know why the alarm didn't go away with the interface adminis...
What's the maximum number of T1s that can be aggregated into a multilink on a 7609?I have a client that wants to bundle two bundles of 8T1s together. Is this possible? If yes, what is the configuration?-Vev
I am trying to traceroute from one remote site to another remote site--A to Zz router (destination of trace)gig 0/0 with an IP address of 192.168.255.25----connected to our ISP (using bgp)(bgp neighbor shows 192.168.255.26) AS XXXXgig 0/1 with an ip ...
Dear All,I have WS-C3750G-24T-S L3 switch. I want to know whether i can configure OSPF in this switch or not.Please provide me the help documents and commands to check this feature.thanks in advance...
Hi,I have six 3550 switch connected in a cascading manner. But out of six switchs 3 switchs have nearly 60% CPU utilization. Please find the attached show tech file. Please help me to resovle the issue.
