Routing

Hi,I used to have an interface configured on Router A:interface Serial2/0:2 description <cct & location> bandwidth 1024 backup interface Dialer3 ip address <removed> no ip redirects no ip unreachables no ip proxy-arpDIALER 3 still exists.The connecti...

My co-worker just deleted the image files on our 3560 switch "Delete Flash". How can we reinstall???

Hi,is there a command that show me how many queues are active on an interface?1, 2, 3, etc....with sh queue serial 0/1/0 I can see the number of conversations but on wich queue are those flows????thanks a lot

Hi,I am looking for a switch that is Earthquake proof switch with DC power. NEBS compliance would cover the earthquake requirement. So far I have found the Cisco 2955 and the Cisco 4948 switch.The 2955 is far too bulky and the 4948 would be fine exce...

Our school has a fairly simple setup. Most department switches (all cisco) are connected via fiber to our core switches. The core is connected to our router, which is connected to our ISP's router. Every morning our Internet connection comes to a ...

Howdy Experts!am working with a NEW Environment needs Mutual Redistribution from EIGRP 2 OSPF and vise verca;with route-maps and Tag Route.I need explanation about these issue or a useful link that describe the above..10xs for ur Help...

I setup a simple OSPF configuration but I am not seeing the OSPF route when doing a show ip route. The show ip ospf neighbor command is working correctly. Here is the configuration I setup http://www.cisco.com/en/US/tech/tk365/technologies_configur...

Howdy Experts!in Redistribution;where & When we use rout-map with Tag,to tag Special Routes;in wish case? 10xs FOR ur Help

I have tried to set up ssh on a cisco 850 router. I've used the correct commands and created the keys,etc. When i run a show ip ssh, it says its disabled. Nothing i seem to do works.any ideas?

Dear all,I am trying to implement QoS in a frame relay connection, i am configuring on the side where the jam occurs. But i could not see any improvement in the quality. what may be wrong ? Below there is my configuration:class-map match-all voice-tr...

Problem context & Scenario description - We have recently implemented MPLS IP VPN with AT&T. We have 3 main offices and 10 other branch offices world wide and they all are connecting to AT&T MPLS VPN either via frame-relay or ATM ePVC. AT&T routes va...

what is RIB-failure in BGP

Dear All,There is no match ip address for access-list, but do see traffic passing by and BGP is established well.There is virtual template configured for the router, below is the interface configuration:RouterA#sh run int s0Building configuration...C...