We are provided a QinQ service from a carrier - Each customer tail is a vlan chosen by us(we inform the carrier of the vlan), which we place into L3 dot1q Int, and then trunk to the Carrier Agg(carrier connecting port is QinQ.)
Would the carrier have a single outer tag configured for all our customer tails?
Carrier outer tag vlan 100
Customer Site A vlan 200, Customer Site B vlan 300, Customer Site C vlan 400
We trunk vlans 200,300+400 to carrier carrier configured QinQ port (Outer tag vlan 100)
Each customer site, the carrier installs an NTU, which I assume they configure an access port on the LAN side with the appropriate vlan, and then the WAN side of the NTU would be a trunk(allowing that vlan) which would connect to the carriers core where the connecting port would be configured as QinQ with outer tag vlan 100?
Would the carrier do this for every one of our client sites (i.e. Use outer tag vlan 100 on all ports on the core connecting to there NTU's at our customer sites?)...i.e. Is this how carriers typically provide this type of service?
Wi-Fi 6 vs. 5G: Who is the winner? What’s the best one? Which one to choose?You may have heard these topics in many articles and conversations. But the fact is that if you choose one over the other, you may fail to provide your organization with the best ...
Whilst carrying out resilience testing to confirm igp/ebgp multipath is working, I have stumbled upon the below issue.The attached sketch crudely shows the topolgy of the network. 2 cores with a cross connect running ibgp, from each of the cores I have 1 ...
Learn how Cisco wireless assurance provides real-time and historical analytics for deep network visibility and simplified troubleshooting.
Learn how you can easily manage all of your connected devices and services and identify and solve issues before they...
I have a device connected to an access switch port. I would like to configure a net flow to gather the amount of traffic going via the interface. I will be sending all that data to SolarWinds. My question is how do I configure a netflow on WS-C6506. I tri...
Hello, We are working on a spare switch (with 12 fibre modules), which needs to be used as the failover switch in our company data centre. Cisco switch model : WS-C3750-12S(PowerPC405) Can you confirm the below : i. Does this switch su...