Switches - Small Business

Hi, I can't figure out how to configure a port membership with multiple VLANs. My setup: - VLAN10 - VLAN20 - port settings tab: port24 in general mode - ports to VLANs tab: untagged everywhere, when I set port 24 membership  to VLAN10 I can't set por...

Hi All;Very strange situation.Created 2 separate VLANs on SGE2010P switch. Neither in Native VLAN 1.For example;Port g01 in VLAN 56Port g25 in VLAN 56Port g10 in VLAN 10Port g37 in VLAN 10All appears to work well within the respective VLAN (i.e. DHCP...

Hi All, We need some  flash related information for Sx300 and Sx 500 switches 1)  How many flash devices are supported ?  Shall we add removeable flash devices.If yes, How to get the flash related information via MIB? 2)  Is there any alternative mi...

Just updated the fw to 1.2.5.70 and after a while, the device crashed wth the following message in the flash log.21474836472012-Jun-17 11:46:21Emergency %SYSLOG-F-OSFATAL:    FATAL ERROR: GOAH: ABORT DATA exception   ***** FATAL ERROR *****   SW Vers...

Does anyone know if the SGE series switches support multicast across VLANs?If so, how do you configure it?I have IGMP snooping enabled globally and for each VLAN.Bridge multicast filtering is enabled as well.

Does anyone know, how to set the management interface on a SG300 Switch in Layer 3 mode? I've some vlans configured on the switch with interfaces in each of them:Vlan 100 (10.0.1.254 /24)Vlan 200 (10.0.2.254 /24)Vlan 300 (10.0.3.254 /24)...Vlan 900 (...

Hi there,An end user is looking to connect 21x IP Cameras to the switch and they require at least 6W port port. Now, the datasheet states that each port on the SF300 provides 15.4W.I need to double check so that the end user will not start connecting...

Hi, I'm considering buying the SGE2010 48 port switch. Does anyone know if it can do layer 3 switching? In the administration guide I find references to static routing and VLAN interfaces. But the guide doesn't come out and say "you can do routing li...

Hello.I want to use a managed 24port Switch with poe on all ports simultaneously. I have found that SRW224G4P-K9 can give up to 180w to any of its ports. My question is if it can give 7,5W to all ports simultaneously or 15W to only 12 ports.Thank you...

I have just purchased SLM2016T-UK (SG200-18) and trying to register the warranty online (was told by the reseller to do so) but I can't find any link direct me to the correct site. can anyone help?Thanks.

I have a small SG300-8 switch to connect 1Gbps Internet Connection to a router and a server console. Today we have suffered a network outage and I don't know the reason and if it has been related with the switch model. Since this afternoon I have a g...