Switching

Hi Team,I have a cisco 4507 chassi running with "cat4500e-universalk9.SPA.03.06.04.E.152-2.E4.bin" iosi received the below error on the module 5 and same time entire connectivity of the module went down post hard rest of module 5 same came up and wor...

Estimados Señores Buenos dias Tengo un switch cisco 2960 el cual tiene la versión de IOS del año 2011 (v12.2) y quiero actualizar a la última versión data de agosto 2017 (v.15.0).Favor de indicarme como y de donde puedo descargar la IOS y enviarme un...

Hello,I want to split a QSFP 40G interface of Catalyst 6807XL in 4x10G SFP interface and saw that exist a cable with this requeriment.What need to do in mines interface to split the interface*Commands for Catalyst and Nexus 9332PQ  Rergards

Hi guys, I am working on a design for a client who wants to update their Campus LAN Network and I would like to consider APIC-EM as the core element to to manage the network Devices The point is that reading the document: "Cisco EasyQoS Application f...

new features in version 9.1(5) released March 31, 2014   Improved one-time password authentication    Administrators who have sufficient authorization privileges may enter privileged EXEC mode by entering their authentication credentials once.   The ...

I performed an IOS upgrade on my 6513 with redundant 720 sup's.  I was under the impression that when I forced a switch to the standby sup using the redundancy force-switchover that it would be seamless.  But what really happened is that when it swit...

Can I replace my Catalyst cisco 3650-X series PoE+ with WS-C3650-24PS-S-Cisco 3650 24 Port PoE 4x1G Uplink IP Base switch?

Hello,We are planning to use migrate to the VOIP and for that we want to buy a Switch (may be a Router too) for the Qos and creating VLANs, please can someone advice me for a small switch layer 3 with 32 ports and Router WIFI and not expensive cause ...

Hi .I recently purchased the SG500 cisco switch , I need to create two vlans for voice where IP phones are using and one Vlan for data.  I have only one port at desk so i need to connect LAN port to IP phone and from IP phone to System. Please help m...

Hi all,I have WS-C3850-24XU switch. I need to make a migration from 3750 switch to 3850 switch.when using this command "snmp-server enable traps cluster" I get the below error messagecluster parameter/option is not recognised.the switch is brand new ...

Hi There,I am running a Cisco ASA 5512-x version 9.4Is there a way to port forward a bunch of ports from specific external IP address to one of my internal IP addresses. What I currently have is a lot of network objects, all with the same host, each ...

Hi all Please accept my apologies for posting so much command output and thanks in advance for your support.- I am tring to find the reason for drops on the port connected to my colleague's pc but unfortunately haven't been able to conclude. I have g...