Switching

HI, I bought used router Cisco 2621. When I startup the router every time it starts in rommon mode, I found that system file is corupted and I don't know how to download soft for my router.

Hi guys,Ive tried to configure NetFlow on layer 2 without success.I configured the recond\monitor\exporter like the configuration guide said. but still i dont receive any netflow traffic. I checked the firewall on the VM and it looks fine.Anyone have...

Can anyone provide a "show power inline" with the available PoE-Budget for the new Cisco 3650-24 PoE+ Switch? We have to be sure that the 390W from the Datasheet is 100% correct.Many thanksManuel

Hi All,     In my clinet place we have 2MB leased line and 2MB MPLS link, Both are from different services provider.     Issue is that we need to load balances in those links, Kindly share the possible ways pls.

I'm deploying a setup where I'll have a pair of 2232TM-E switches in a single rack (servers have the option to run data connections to both) which are going to then be uplinked to a pair of 5548UPs near my 7K cores using FET.   My confusion comes fro...

Dear all,Here is my problem :I have the network A with a DHCP Server.Network A knows the network B only with its NATed addressesIn DHCP Server (which is on a Solaris machine) the remote client is configured with NATed informations.In network B I have...

Dear All,I have a project consists of 18 IDF rooms with 55x48 1G ports Access Switches, 2 x10 G uplinks to each core switch (2xN7k), 270 Wireless Access points.what is the preferred switch? Cisco 2960-XR was recommanded for access switch, is there an...

HiIs there any issues of multicast traffic on Nexus 7k

Hello.We are looking to have a setup like this:                                                      User PCs                                                            |                                                            |                   ...

Hi ,How we can check the chassis serial number ( Not Process ID). My switch is Cisco WS-C6509. Show Inventory and Show Diag is not working in this switch. Is there any other cmd for getting the chassis S/N.

I've been working on getting wake on LAN setup in our corp network.  At the center of our network are a pair of Nexus 7Ks.  While I have been successful in getting WoL to work over UDP 7 across subnets and out to our remote sites, I have not been suc...

Hi,I'm trying to configure a RSPAN with multiple source ports on multiple switches and 1 destination port.On the first switch I have :Session 1---------Type                   : Remote Source SessionSource Ports           :     Both               : Po...

Hello !!Is it possible with OSPF  to advertise to a specific neighbor route that router originate it-self, with redistribution command, as metric-type 1  and for for all others neighbor metric-type 2 ?Example,   I'm router and I have 2 ospf neighbors...

I am troubleshooting an issue with CPU utilization on a 3750X stack. The show controllers cpu-interface tells me that the icmp queue counter is growing quite fast ... about 5000 per second. I read that this is a queue for ICMP redirect messages.Now, ...