This is probably a simple one, but driving me crazy nonetheless...I have a small lab setup, router, switch, PC. I am setting up a small VoIP lab and configuring the VLANs and trunking for VoIP to function, but have run into something that I'm not su...
Hi all,Are there any guides on the Cisco support site which deal specifically with monitoring performance on LAN switches running IOS?There are a lot of different commands to show things like interface counters, CPU utilization, etc. I'm not trying ...
Hi GurusCan anybody clarify the following questions, If w:e enable LACP or Etherchannel between 2 switches (A and B) composed of 4 links (in trunk). If switch A receive a broadcastWill it send it by the logical port or each individual port? I assume ...
The white paper for the cigesm switch says the following: "The number of trunk ports multiplied by the number of VLANs on the switch must be less than or equal to 128."I guess this means that I can only define 128 vlans on the switch and allow as man...
Hi all. Here from Spain.¿How can i connect a Cisco switch Nexus 5000 to a Cisco switch 3750-E at 10 Gpbs of bandwith via copper cables? 3750's switches have a TwinGig module (10Gpbs, SFP interface), and i think also have a X2-10GB-CX4 transceiver mod...
hello all,How to configure the automatic failover between two connection (access) internet in cisco routeur 2800 serie?Best Regards,
I upgraded one of my old 3500 switches to a 4948. The log on the 4948 doesn't show port events like up/down events. All I see in the log is configuration changed events.Is there a way to turn this on?I have this in the config.logging buffered 65536 d...
HelloI have recently setup a medium size network with around 70 switches and I am now getting to the point where I need to configure the time on those switches. I understand that I need to identify a device to use as NTP server. We don't currently ha...
Dear All,We had a problem in one of our ACE module which we are using with a 7600 chasis. ACE module rebooted automatically and came back so opened a TAC case with cisco and told us that it happened due to a bug in OS of ACE which could not be fixed ...
Hi,I am familiar with use and concept of VTP however I have never used it in a large network deployment, certinaly not in a modular switch block architecture. However, as a result of recent issues due to trunk link mis-configurations and spanning-tre...
Is there a general rule of thumb on how a switch ethernet blade should be populated in relation to getting the best performance per asic/port combination?For example:If I have a four 10/100 ethernet blades on a 6509 and there are 12 ports per asic on...
I have a couple of VLANs on my Cisco 4507.These are the Vlans10.10.1.X/24 -- management10.10.2.X/24 -- User vlan10.10.3.X/24 -- Server vlanI don’t want 10.10.2.x and 10.10.3.x to access Management network.But management network (10.10.1.x) should be ...
I've got 2 3750 switches in a secure vtp domain - one is vtp server, the other vtp client. I'd like to manage both switches separately with no vlan propagation between them, i.e. not use vtp at all.Is there a way to reconfigure the switches such tha...
I upgraded the ios for cisco 2950 switch with c2950-i6k2l2q4-mz.121-22.EA13.tar.After upgradation,i was able view the cisco web browser,by using the link http://10.x.x.x/.But after sometime ,i tried & its not working now.I m getting the below message...
Hi I am Jibu Ninan Kurian i need help from the experts. for 6506-E IOS upgrading from ipbase imge to S72033-advipservicesk9_wan-mz-122-18.SXF17.binsup-720-10g-3 best regards Jibu Ninan Kurian
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-17-2024 06:45 PM | ||
| 11-17-2024 06:34 PM | ||
| 11-06-2024 04:49 AM | ||
| 11-04-2024 07:57 AM | ||
| 10-24-2024 11:57 PM |
| User | Count |
|---|---|
| 15 | |
| 9 | |
| 6 | |
| 5 | |
| 5 |
