Switching

I just purchased a cisco 861w router for our offices. We have remote backup software that runs on one ofour servers that backs up client servers. I need to be able to open up a series of ports in order for data to be sent to this server. I have done ...

I have 2 routers connected by an HP switch. The 2 routers have incomplete ARP entries for each other. The switch sees the correct MAC address on their respective ports. I've changed cables on both sides, moved switch ports for both devices, and ha...

if I have a client that is looking for a certain destination ip address, would it be possible for the router to amend it using pbr of a class map etc ?cheersCarl

I'm trying to suggest should I use patch-panels in server 19" racks and use stand-alone telecomm racks for access layer switches OR should I install 2-3 access layer switches in every server rack?First version looks more correct, but than I have to u...

Hello,Is there any configuration document from cisco on Securing Routers / Switches.I have Cisco 4500 // Cisco 2800 and Cisco 2960

Is there any advantage between the two?

Hii have 40mbps metro link terminating on 3750 switch.the link is between 2 office and carries data & voice traffic. i want to restrict my data traffic to 20 mbps.i am defining the access list to match my data traffic and calling the same in class ma...

I have two distribution switches that have a VSL link between the two. I'm having an issue trying to connect these 2 switches to 2 3750 stacked switches. The way i have it currently setup is that I have one connection from vss 1 and one connection ...

Hi,CCO documentation states that"priority-queue queue-limit" command is supported in 12.2.18SXF2 and above for Cat 6500, Sup720-3b.For IOS below 12.2.18SXF2, what is the buffer that is allocated for priority queue?Using 1P3Q8T as an example, if i hav...

Our ISP going to connect leased thru Ofc cable. They are telling instead of using G.703 and V.35 Modem we can go for G.703 to V.35 Converter. What is G.703 to v.35 converter? How to use this converter? If anyone having image of this converter pls pro...

Hi, I would like to check if there is a class-map statement as follows:-class-map match-all Data match ip dscp cs1 af11 My question is that would the class-map be effective when both cs1 and af11 present or is it an OR operations ?Thank you,...

from ciscoCan we pull network usage statistics 6500 switches,Is there any command, OR any other monitoring software.I have a cisco works LMS.But i dont find any such template or similar like Network utilization report that can help me.

I have two switch and a router.I will name them switch A and B. SwitchA is connected to f0/0 of the router and switchB is connected to f0/1 of the same router.SwitchA is connened to a lan network which is 172.1.30.0/24 network.which the interface f0/...

Hi All,i got in trouble with SPT with Cisco 6509 .The four switchs are link with 802.1q trunk, the port cost is show on diagram .I setup vlan 3808 on four switchs and router ,ip address as below.s3:1.1.1.73s4:1.1.1.74s5:1.1.1.75s6:1.1.1.76router:209....