Switching

hi all,running sup32 with vrf-lite/802.1x. running 12.2(33)SXH2a, we created the aaa and radius. source the interface from a VRF, but for some reason it can't communicate to that VRF via radius. everything else works. i'm able to ping the host.

Dear Netpro community,I am puzzled by the high number of ignore counter showing on vlan 1.Base on the output of debug ip error, here is the captured output:9w1d: datagramsize=342, IP 51203: s=137.55.136.151 (Vlan1), d=255.255.255.255, totlen 328, fra...

What is the behavior of the config if I were to remove the second switch from a 4 switch 3750 stack. Would the switch 3 reassign itself to 2? What if I want to move switch 4 (48 port) to switch 2 (24 port)?This a permanent removal.

Hi.I'm using Cisco Network Assistant. and under View > System Messages i'm recieving this : Description: Interface GigabitEthernet0/10, changed state to downExplanation: The interface hardware went either up or down. Recommended Action: If the sta...

I am trying to setup ip helper for an older application. Examination of the broadcast packet shows that the ttl is set to 1.Is there a way to change the ttl by matching the packet and having the router increase the ttl to the needed diameter?

I have two private networks that touch at a NAT router:192.168.16.0/2410.1.0.0/24I have a workstation with an IP address of 192.168.16.10 that needs to access the server resources on IP address 10.1.0.23. For security reasons, we want to use NAT to p...

my CW server has SSH version 1. some of my devices currently running SSH V.2. should I upgrade my ssh on CW server to Version 2. or CW still able to access those devices with other transport method for Netconfigration

i am trying to configure a multicast network. Is there any program i can use to test out multicast. This is for my CCIE training. Preferrablly a windows program. Something with a server and client.

I need to connect a 3750 switch port to a Metro Ethernet Service from AT&T.All the traffic that is sent to them needs to have a vlan tag of 699 - their end will only accept traffic tagged with 699.I have configured the vlan as follows:interface vlan ...

We have a solution we are working on that requires dynamic vlan assignement.We are setting up wireless guest access.What are going to do is create an SSID for guest users, when the user authenticates to our ACS they will be given the VLAN info and ac...

I am trying to configure 4 ports from 2811 etherswitch for etherchannel. It should be a trunk port for dot1q encapsulation. The router will perform intervlan routing with SVI.This is connecting to 2950 switch. Can't seem to find the example configura...

Does anyone know if Cisco has a 10GB SFP for the 3750G PS/S switches? If so, could you please provide the model #?Thank you

I have a 3560-48TS-E with IPBASE 12.2.37 se1trying to upgrade IOS to ADVIP 12.2.25 seb3using this commandarchive download-sw /alow /overwriteI get error unable to create a temp dir "flash:update"