Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...
Forum Posts
Running IOS version 12.2(25)EWA.
I have an AP connected to FA0/1 and FA0/3 is connected th a ASA 5505. VLAN 20 is a secure wireless vlan and VLAN 30 is a unsecure wireless vlan. All vlans can get to the internet but I can no longer access the switch or any device attatched to the sw...
This is on Page 209 of BCMSN 4th Edition Self-Study Guide CCNP Learning by Froom, Sivasubramanian, Erum. The following is the configuration given in the review questions of Chapter 4 (Ex 4-31, Pg 209):int Gi3/9mtu 9216no ip addressswitchportswitchpo...
If i configure a vlan on a switch , say vlan 100 and only configure trunk ports to carry that vlan traffic - there is no access port on vlan 100. Is it going to work or do I need to ocnfigure atleast one port in vlan 100 in access mode? This is on a ...
I have an access list with "deny icmp any any" in it and I apply it to my external interface. When I PING the Interface, although I don't get a ICMP ECHO back, I do get a "Destination Net Unreachable" ICMP message back which I don't want either. I...
I have to add two vlans to a trunk link between two Cisco WS-C6509. The link already trunks many other vlans. The two additional vlans require mtu of 9216. What are the consequences of adding "mtu 9216" to the port doing the trunking? Will they reset...
Hi, how many queues are supported in 3560, 3750 and 6513 6509 switches ?Where can I find more info about itThanks.Andrei.
Resolved! DHCP Snooping
I am trying to determine on what platforms or IOS/CAT OS versions support DHCP Snooping.
We are installing a WiSM module in a C6509 with a Supervisor 720/MSFC3. The WiSM documentation indicates a minimum version of 12.2(18)SXF2. Currently we use 12.2(17a)SX1 with an "IP LAN Only" feature set.The latest safe harbour edition is 12.2(18)S...
Hi all, I have a doubt in Power supply specification for Cisco Catalyst 4510R-E switch.My query is " Can Catalyst Switch 4510R-E can be run only with the External Shelf Power supply? "Please suggest me the solution ASAP..
A colleague of mine mentioned a "Lolipop Configuration" and I have never heard this term. Can someone tell me what this means?
Ive tried to look through the documentation on this, but can you do two default routes on a pix also, for load balancing?
Hi all,Our internet router sometimes (5 to 20 minutes in a day) becomes unresponsive for the public interface of our VPN device 'nortel contivity'. When we look into the logs/alerts on router we found that at the time of outage the router requests ar...
Does anyone know if the WS-X6748-GE-TX module has MDI/MDI-X support and if so what port speed is it supported at?as always thanks
Resolved! DHCP Relay question
Hello experts,Hope you can help me with this scenario:PC|(NM-16ESW)c2691#1(Fast0/0)|L2_Sw - PCs |(Fast0/0)c2691#2I have a DHCP pool configured in router c2691#2, which leases IP addresses to the PCsattached to L2_Sw. I need to plug a PC on one of th...
