Switching

I am port-channeling between 2 6500 switch with Sup720's running IOS with the following code: s72033-jk9sv-mz.122-18.SXD7The original configuration, is listed below.Int port-channel 1No ip addressLogging event link-statusLogging event bundle-statusLo...

Hi,How do we check memory utilization and processor utilization. Didnt find similar command like router ( #show process cpu sorted )any link on cisco.com for this command.appreciated.Thankx in advance.Subodh

I will like if you guys with DHCP on your switches can share your nightmare of this feature with.I have 4 4510s and I am thinking to eliminate my DHCP/DNS servers but I was told that it wouldn't be the same and it is not recommended.

i am looking to create an acl to block all traffic except for remote desktop connections to an interface on a cisco 3640the total network is basically a 10.0.0.0 and the network for the interface is 10.101.150.0

Hello ladies & gentlement,I have a question that you might be able to help me with. It is regarding Frame-Relay, i seem to have some gaps in my study material... I understand how it mostly works but i feel that something is missing. The question is a...

Anyone set this up . I have downlaoded the .tar file and reloaded the switch, set ip http server enable and set the login to the enable password . Anything else that needs to be done? Unable at this point to connect via the browser . Also what...

I am currently using PAT to get outside web/email traffic to an inside host on my ASA 5505. All is working accept the only issue is that when I look at my web/email logs all connections are showing as coming from the ASA public IP address. Is there...

Hi,I'm having issues getting the correct rule that allow all of my 192.168.1.0/24 (inside) machines to access services like http/smtp that are being exposed to the outside via PAT.Indeed I can access everything from outside the network but from withi...

hi,Can you create a port chennel between a Cat6506 running CatOS and a C3560G running IOS ?.This is a continuation of yesterday's problem trying to trunk and channel between the 2 Cat6506's

We run an all cisco network wth a 6500 core switch and 3500 access layer switches. In one instance a customer had a VOIP gateway device plugged in improperly and as a result all clients on that specific VLAN looses their regularly assigned IP address...

I'm trying to get a Cisco 1751-v router to assign DHCP addresses to 7940 phones. I can't for the life of me get this to work.The phones are plugged into a PoIE 3500 Cisco Switch. The router is plugged into port 24 of the switch.Switch IP: 172.16.3....

I would like to EtherChannel a server running HP ver7 NIC Teaming. The question I have is can I etherchannel two ports on different modules? or do they need to be on the same module?Thanks,Burleyman

I installed a WS-X6748-SFP in my 6509 with two sup 720 base and it changed the switchmode from flow-through to truncated which I believe is due to the fact that i had one non fabrice enabled blade WS-X6348-RJ-45 in it.%SYS-3-FAB_CHNGMODE:System swit...