Switching

Hi all, when we have broadcasts are they always layer 2 broadcasts ie arp broadcasts,or can you have layer 3 broadcasts ?

Hi - i have 2 x L2 WAN links between buildings. 1 = 1G wireless (seen by the switch as an L1 cable)1 = 155Mb ISP (seen by switch as an L1 cable)Right now they're set up in RSTP, but it would be great to utilize the very expensive 155Mb link no-just w...

Ghosting to multiple workstations using the software Ghost used to work perfectly. Now it has stopped working. It does work with unicast.The only change I can think of is that we upgraded out core switch from CatOS to CiscoIOS.Can this affect multica...

Hi all. I'm deploying a new NW and was planing to use R-PVST for my loop avoidence. If i deploy this, and say, someone from the helpdesk plugs up another 3rd party switch that doesn't support PVST.. then loops the NW. Will i be safe?

In my network i have some routers which are connected only to one main router(serial leased line connection) and a switch. If i use default-routing is that enought or i must use a routing protocols (etc rip, eigrp) and etc. What's the best think i sh...

I need to know how can I up load a IOS that is on a CD to a router 1700 series

HelloCan anyone help me understand if it is possible to have NAT pools that NAT Inside Local addresses to Inside Global addresses, plus static entries that NAT static Inside Local addresses to a static Inside Global addresses? I have a app server on ...

Dear all,I want to know why bigger ISp prefer Is-IS instead of OSPF . pl. explain with exampleRegards

I have seen large numbers of multicasts on one specific portion of my network. I cleared the counters and within a weeks time I saw upwards of 26 million multicasts on one switch that only had less than 15 users on it. I have noticed high multicast...

Hi all,The core network is switched using a 4510R. I need to route to a new subnet (network extension) and I want to use the 4510r to do this instead of purchasing a new router. I've simulated the 'new' network using a 3560G in a lab environment an...

Hi to all,we have a Catalyst 4503 switch. Is this switch is capable of Layer 3 switching? If not, what module do i need? this one uses IOS, not CatOS. thanks in advance

Hello,I am looking to upgrade the IOS on our X4232-L3 modules in a 4006, and after following all the links that point to the download area (have CCO access), I find that there are no images available.I know the X4232-L3 is getting very old, but has a...

Hi I have a 877W router.I have a copy of my IOS, running config and my startup-config in a safe place which I really want to put back. The router will boot but my problem is I can no longer talk to the router via IP but I can through the console via...

Hi, i am wondering if i can do this kind of etherchanneling.We have a backup server with 6 gigabitEthernet and we wanted to bundle all 6 of them to form one logical interface with one ip address and physically connected to same vlan ports.We also wan...